1
The prompt on this page opens in SpeakCAD already filled in — after sign-in too. The model renders in your browser. Preview is free.Desk & office
Samsung The Frame soundbar gap shim
This is not a fixed STL. SpeakCAD generates the samsung the frame soundbar gap shim to your millimetres, you adjust it in the chat, then you download and print it.2
Change any millimetre in the chat: wall thickness, hole size, the thing it clips onto. Iterations stay in the tab until it matches what you own.Adjust
3Print
Download a watertight STL or 3MF for 2 credits, drop it in your slicer, and print it. Small fit fixes re-download free.Get it nowThe example prompt comes with you, even through sign-in. Preview is free; a download costs 2 credits.
What a samsung the frame soundbar gap shim is
A shim that sits between a The Frame (2024/2025) and a soundbar so the Slim Fit Cam still sees the room. The pad is 80 × 40 × 12 mm with a 2 mm TPU face. Print two in PETG or TPU.
The official gap is too tight for a third-party bar. Tell SpeakCAD bar height, preview the shim in the browser without paying, then download the STL.
Example prompt
Model a The Frame soundbar shim 80×40×12 mm with a 2 mm TPU face, pair.
People also search
frame tv shim stlsamsung frame soundbar gap 3d printthe frame bar spacerframe tv camera gap 3d model
Questions people ask about a samsung the frame soundbar gap shim
A shim that sits between a The Frame (2024/2025) and a soundbar so the Slim Fit Cam still sees the room. The pad is 80 × 40 × 12 mm with a 2 mm TPU face. Print two in PETG or TPU.
Click Get it now on this page: the example prompt is filled in for you after you sign in. The model renders in your browser — nothing to install — and previewing is free. Adjust any millimetre in the chat, then export a watertight STL or 3MF for 2 credits when you want to print.
Start from this working example and replace any number with what you measured: Model a The Frame soundbar shim 80×40×12 mm with a 2 mm TPU face, pair.
The official gap is too tight for a third-party bar. In SpeakCAD you generate and preview for free, then download a file sized for the part you actually own.
No. SpeakCAD runs entirely in the browser: the chat, the 3D engine and the live viewer load in the tab. The only file you download is the finished STL or 3MF.
More desk & office
MacBook Air M4 USB-C hub under-clamshell trayA 18 mm tray that sits under a closed MacBook Air M4 and holds an Anker or Anker-style 6-port hub so HDMI and SD do not hang off the left side.IKEA HEMNES nightstand 35 mm cable grommetA 35 mm grommet that drops into a drilled HEMNES nightstand top so a lamp and phone cable pass without a raw hole.Samsung Galaxy Buds 3 Pro desk wellA well that parks a Buds 3 Pro case (about 65 × 50 × 25 mm) at 15 degrees with a 12 mm USB-C slot.Anker MagGo Qi2 charger puck desk standAn angled desk stand for the round Anker MagGo Qi2 wireless charging pad, so a Qi2 phone such as an iPhone 16 or Galaxy S25 stands at 60 degrees for video ca…Garmin Forerunner 970 bedside charger standA small bedside stand for a Garmin Forerunner 970 (about 47 mm) that holds the watch on its clip charger at 25 degrees so the display is readable from the pi…Arturia MiniLab 3 angled feetReplacement rear feet that put a MiniLab 3 at 8 degrees, 20 × 12 × 10 mm with the stock 4 mm pin.