1
Replacement parts
Sage Barista Express drip tray grid
This is not a fixed STL. SpeakCAD generates the sage barista express drip tray grid to your millimetres, you adjust it in the chat, then you download and print it.Building the 3D preview…
2
Adjust
Click a part and change its numbers in the viewer, or ask the AI in the chat: wall thickness, hole size, the thing it clips onto. AI changes use plan credits.3Print
Download a watertight STL or 3MF with a Maker or Pro plan, drop it in your slicer, and print it. Small fit fixes re-download free.
Get it nowOpening the ready-made model is free. A plan covers AI changes and the download.
Example prompt
Model a Sage Barista Express drip tray grid, 200×90×3 mm with 3 mm slots, 2 mm rim, PETG.
What a sage barista express drip tray grid is
A replacement drip tray grid for the Sage Barista Express, sold as the Breville BES870 and BES875, a flat grid of about 200 × 90 mm that sits in the drip tray under the group head. It is 3 mm thick with 3 mm slots between 2.5 mm ribs, a 2 mm rim underneath and 0.4 mm clearance to the tray walls. Print face down in PETG, which copes with hot water and cleaning tablets.
The Barista Pro and Bambino Plus grids are different sizes and shapes, so this one will not drop into them. Open the ready-made grid free in SpeakCAD, adjust the outline to your measured tray in the viewer or the chat, then download the STL.
People also search
sage barista express drip tray gridbreville barista express drip traybarista express grid 3d printbreville drip tray stl
Questions people ask about a sage barista express drip tray grid
A replacement drip tray grid for the Sage Barista Express, sold as the Breville BES870 and BES875, a flat grid of about 200 × 90 mm that sits in the drip tray under the group head. It is 3 mm thick with 3 mm slots between 2.5 mm ribs, a 2 mm rim underneath and 0.4 mm clearance to the tray walls. Print face down in PETG, which copes with hot water and cleaning tablets.
Click Get it now on this page and sign in: you can open the ready-made model for free, and the example prompt is filled in if you want the AI to redesign it. The model renders in your browser, nothing to install. Change any millimetre in the viewer or the chat (AI changes use plan credits), then export a watertight STL or 3MF with a Maker or Pro plan when you want to print.
Start from this working example and replace any number with what you measured: Model a Sage Barista Express drip tray grid, 200×90×3 mm with 3 mm slots, 2 mm rim, PETG.
The Barista Pro and Bambino Plus grids are different sizes and shapes, so this one will not drop into them. In SpeakCAD you open the ready-made model for free, change it to your measurements, then download a file sized for the part you actually own.
No. SpeakCAD runs entirely in the browser: the chat, the 3D engine and the live viewer load in the tab. The only file you download is the finished STL or 3MF.
More replacement parts
IKEA KALLAX insert-drawer stopA stop that keeps a KALLAX drawer insert (33 cm cube) from being pulled out of the cube.Sovol SV06 filament guide with 608 bearingA filament guide for the top of a Sovol SV06 that routes filament from the spool holder to the extruder over a 608 bearing (22 × 8 × 7 mm) so it no longer ru…Samsung washing machine softener siphon capA replacement siphon cap for the fabric softener compartment of Samsung front-loader detergent drawers, the small cap that goes missing and makes softener po…Eurorack 4HP blank panelA blank panel that closes an empty 4HP gap in a Eurorack case.Yeti Rambler MagSlider lid slider replacementThe magnetic slider on a Yeti Rambler 20 oz or 30 oz tumbler lid is the part that goes through the dishwasher, gets lost, and costs almost as much as a new lid.Nanoleaf Shapes 10 mm corner spacerA 10 mm spacer that sits behind a Shapes panel so a corner that is out of plane still clicks.