1
Brackets & mounts
Raspberry Pi Touch Display 2 desk stand
This is not a fixed STL. SpeakCAD generates the raspberry pi touch display 2 desk stand to your millimetres, you adjust it in the chat, then you download and print it.Building the 3D preview…
2
Adjust
Click a part and change its numbers in the viewer, or ask the AI in the chat: wall thickness, hole size, the thing it clips onto. AI changes use plan credits.3Print
Download a watertight STL or 3MF with a Maker or Pro plan, drop it in your slicer, and print it. Small fit fixes re-download free.
Get it nowOpening the ready-made model is free. A plan covers AI changes and the download.
Example prompt
Model a Pi Touch Display 2 stand, two 120×25×70 mm feet at 20 degrees, M2.5 holes for the rear mounts, 45 mm gap for a Pi 5, cable channel.
What a raspberry pi touch display 2 desk stand is
A desk stand for the 7 inch Raspberry Pi Touch Display 2 (about 189 × 120 mm) with a Pi 5 mounted on the back. Two feet hold the display at 20 degrees on its four rear M2.5 holes, with a 45 mm gap behind for the Pi and a cable channel for USB-C power. Each foot is 120 × 25 × 70 mm with 2.4 mm walls. Print on its side in PETG.
The original 7 inch Touch Display is 194 × 110 mm with a different hole pattern, so its stand will not line up. Open the ready-made model in SpeakCAD for free, adjust the angle, then download the STL.
People also search
raspberry pi touch display 2 stand stlpi touch display 2 case 3d print7 inch pi display standtouch display 2 mount 3d model
Questions people ask about a raspberry pi touch display 2 desk stand
A desk stand for the 7 inch Raspberry Pi Touch Display 2 (about 189 × 120 mm) with a Pi 5 mounted on the back. Two feet hold the display at 20 degrees on its four rear M2.5 holes, with a 45 mm gap behind for the Pi and a cable channel for USB-C power. Each foot is 120 × 25 × 70 mm with 2.4 mm walls. Print on its side in PETG.
Click Get it now on this page and sign in: you can open the ready-made model for free, and the example prompt is filled in if you want the AI to redesign it. The model renders in your browser, nothing to install. Change any millimetre in the viewer or the chat (AI changes use plan credits), then export a watertight STL or 3MF with a Maker or Pro plan when you want to print.
Start from this working example and replace any number with what you measured: Model a Pi Touch Display 2 stand, two 120×25×70 mm feet at 20 degrees, M2.5 holes for the rear mounts, 45 mm gap for a Pi 5, cable channel.
The original 7 inch Touch Display is 194 × 110 mm with a different hole pattern, so its stand will not line up. In SpeakCAD you open the ready-made model for free, change it to your measurements, then download a file sized for the part you actually own.
No. SpeakCAD runs entirely in the browser: the chat, the 3D engine and the live viewer load in the tab. The only file you download is the finished STL or 3MF.
More brackets & mounts
TMC2209 stepper driver cooling bracketA bracket that holds a 40 × 40 mm fan over up to four StepStick TMC2209 drivers (15.2 × 20.3 mm each) on a mainboard.Curtain rod bracket for a 25 mm poleA replacement or extra bracket for a 25 mm curtain pole when the set came with too few or one broke.Hidden AirTag mount under bike saddle railsA small clamshell that bolts between the two 7 mm rails under a bicycle saddle and hides an Apple AirTag (31.9 mm diameter, 8 mm thick) where a thief will no…Milwaukee M12 battery wall mount holder for 4 packsA wall strip with four sockets that grip the stem of Milwaukee M12 batteries, from the compact CP1.5 to the XC6.0, so charged packs hang ready beside the cha…iPhone 17 Pro MagSafe bike stem mountAn out-front bicycle mount that holds an iPhone 17 Pro (about 150 × 72 × 8.8 mm) on a MagSafe ring so the camera bar clears the stem.Dyson V10 cyclone tool railA rail that hangs four V10 click-in tools beside the official wall dock so the crevice, combination and mini-motorhead are not on the floor.