1
Enclosures & cases
Raspberry Pi Pico 2 W case
This is not a fixed STL. SpeakCAD generates the raspberry pi pico 2 w case to your millimetres, you adjust it in the chat, then you download and print it.Building the 3D preview…
2
Adjust
Click a part and change its numbers in the viewer, or ask the AI in the chat: wall thickness, hole size, the thing it clips onto. AI changes use plan credits.3Print
Download a watertight STL or 3MF with a Maker or Pro plan, drop it in your slicer, and print it. Small fit fixes re-download free.
Get it nowOpening the ready-made model is free. A plan covers AI changes and the download.
Example prompt
Create a Pico 2 W case, 21.6×51.6×5 mm cavity, 8×3.5 mm micro-USB slot, 3 mm BOOTSEL hole, open antenna end, 1.2 mm walls.
What a raspberry pi pico 2 w case is
A slim case for a Raspberry Pi Pico 2 W (21 × 51 mm) with or without soldered headers. The cavity is 21.6 × 51.6 × 5 mm with an 8 × 3.5 mm micro-USB opening, a 3 mm hole over BOOTSEL and no plastic above the wireless module end so Wi-Fi range is not reduced. Walls are 1.2 mm. Print the base flat in PETG.
The Pico 2 W has the same outline as the Pico W, but the RP2040-Zero and Pico-sized clones with USB-C need a different opening. Open the ready-made model in SpeakCAD for free, adjust the cavity, then download the STL.
People also search
pico 2 w case stlraspberry pi pico 2 w enclosurepico 2w case 3d printrp2350 pico case 3d model
Questions people ask about a raspberry pi pico 2 w case
A slim case for a Raspberry Pi Pico 2 W (21 × 51 mm) with or without soldered headers. The cavity is 21.6 × 51.6 × 5 mm with an 8 × 3.5 mm micro-USB opening, a 3 mm hole over BOOTSEL and no plastic above the wireless module end so Wi-Fi range is not reduced. Walls are 1.2 mm. Print the base flat in PETG.
Click Get it now on this page and sign in: you can open the ready-made model for free, and the example prompt is filled in if you want the AI to redesign it. The model renders in your browser, nothing to install. Change any millimetre in the viewer or the chat (AI changes use plan credits), then export a watertight STL or 3MF with a Maker or Pro plan when you want to print.
Start from this working example and replace any number with what you measured: Create a Pico 2 W case, 21.6×51.6×5 mm cavity, 8×3.5 mm micro-USB slot, 3 mm BOOTSEL hole, open antenna end, 1.2 mm walls.
The Pico 2 W has the same outline as the Pico W, but the RP2040-Zero and Pico-sized clones with USB-C need a different opening. In SpeakCAD you open the ready-made model for free, change it to your measurements, then download a file sized for the part you actually own.
No. SpeakCAD runs entirely in the browser: the chat, the 3D engine and the live viewer load in the tab. The only file you download is the finished STL or 3MF.
More enclosures & cases
DFPlayer Mini speaker boxA small speaker box for a DFPlayer Mini (20 × 20 mm) with a 40 mm 3 W speaker and a Wemos D1 mini or Nano.LD2410C mmWave presence sensor caseA slim case for an HLK-LD2410C radar (22 × 16 mm) paired with an ESP32-C3 SuperMini (22.5 × 18 mm).Bezel case for a 0.96 inch OLED moduleA small front bezel and back cover for the popular 0.96 inch I2C OLED module, turning a bare board into a neat readout you can screw to a panel or stand on a…ESP32-C3 SuperMini case with BME280 sensor ventsA tiny room sensor enclosure for an ESP32-C3 SuperMini board (22.5 x 18 mm) paired with a BME280 breakout (about 15 x 12 mm).Logitech MX Anywhere 4 travel caseA two-part case for an MX Anywhere 4, 110 × 70 × 40 mm with 0.4 mm clearance and a 8 mm dongle well.Arduino Mega 2560 caseA case for an Arduino Mega 2560 R3 (101.5 × 53.3 mm).