1
Enclosures & cases
Raspberry Pi 5 PoE+ HAT case
This is not a fixed STL. SpeakCAD generates the raspberry pi 5 poe+ hat case to your millimetres, you adjust it in the chat, then you download and print it.Building the 3D preview…
2
Adjust
Click a part and change its numbers in the viewer, or ask the AI in the chat: wall thickness, hole size, the thing it clips onto. AI changes use plan credits.3Print
Download a watertight STL or 3MF with a Maker or Pro plan, drop it in your slicer, and print it. Small fit fixes re-download free.
Get it nowOpening the ready-made model is free. A plan covers AI changes and the download.
Example prompt
Create a Pi 5 PoE+ HAT case, 92×62×34 mm cavity, Ethernet, USB, micro-HDMI and USB-C openings, 40 mm fan grille, side vents, 2 mm walls.
What a raspberry pi 5 poe+ hat case is
A case for a Raspberry Pi 5 (85 × 56 mm) powered by a PoE+ HAT on top. The cavity is 92 × 62 × 34 mm with openings for the Ethernet, USB, both micro-HDMI and USB-C ports, a 40 mm grille over the HAT fan and side vents for the heatsink below. Walls are 2 mm with four M2.5 standoffs. Print the base flat in PETG.
Pi 4 PoE HAT cases put the fan in a different spot and the Pi 4 has full-size port spacing that does not match. Open the ready-made model in SpeakCAD for free, change any millimetre in the viewer or the chat, then download the STL.
People also search
raspberry pi 5 poe case stlpi 5 poe+ hat enclosure 3d printraspberry pi 5 poe hat casepi 5 poe case 3d model
Questions people ask about a raspberry pi 5 poe+ hat case
A case for a Raspberry Pi 5 (85 × 56 mm) powered by a PoE+ HAT on top. The cavity is 92 × 62 × 34 mm with openings for the Ethernet, USB, both micro-HDMI and USB-C ports, a 40 mm grille over the HAT fan and side vents for the heatsink below. Walls are 2 mm with four M2.5 standoffs. Print the base flat in PETG.
Click Get it now on this page and sign in: you can open the ready-made model for free, and the example prompt is filled in if you want the AI to redesign it. The model renders in your browser, nothing to install. Change any millimetre in the viewer or the chat (AI changes use plan credits), then export a watertight STL or 3MF with a Maker or Pro plan when you want to print.
Start from this working example and replace any number with what you measured: Create a Pi 5 PoE+ HAT case, 92×62×34 mm cavity, Ethernet, USB, micro-HDMI and USB-C openings, 40 mm fan grille, side vents, 2 mm walls.
Pi 4 PoE HAT cases put the fan in a different spot and the Pi 4 has full-size port spacing that does not match. In SpeakCAD you open the ready-made model for free, change it to your measurements, then download a file sized for the part you actually own.
No. SpeakCAD runs entirely in the browser: the chat, the 3D engine and the live viewer load in the tab. The only file you download is the finished STL or 3MF.
More enclosures & cases
Seeed XIAO ESP32C3 tiny keychain caseA pocket-sized shell for the Seeed Studio XIAO ESP32C3, a 21 x 17.8 mm board with a USB-C port and a u.FL antenna connector.Raspberry Pi 5 Hailo HAT caseA case that clears a Pi 5 with the Hailo AI HAT, 30 mm extra height, GPIO slot and 40 mm fan vents.Seeed XIAO ESP32S3 Sense camera caseA case for a Seeed XIAO ESP32S3 Sense (21 × 17.8 mm board with the camera expansion board, about 15 mm tall).DFPlayer Mini speaker boxA small speaker box for a DFPlayer Mini (20 × 20 mm) with a 40 mm 3 W speaker and a Wemos D1 mini or Nano.LD2410C mmWave presence sensor caseA slim case for an HLK-LD2410C radar (22 × 16 mm) paired with an ESP32-C3 SuperMini (22.5 × 18 mm).Bezel case for a 0.96 inch OLED moduleA small front bezel and back cover for the popular 0.96 inch I2C OLED module, turning a bare board into a neat readout you can screw to a panel or stand on a…