1
Enclosures & cases
Raspberry Pi 5 M.2 HAT+ NVMe case
This is not a fixed STL. SpeakCAD generates the raspberry pi 5 m.2 hat+ nvme case to your millimetres, you adjust it in the chat, then you download and print it.Building the 3D preview…
2
Adjust
Click a part and change its numbers in the viewer, or ask the AI in the chat: wall thickness, hole size, the thing it clips onto. AI changes use plan credits.3Print
Download a watertight STL or 3MF with a Maker or Pro plan, drop it in your slicer, and print it. Small fit fixes re-download free.
Get it nowOpening the ready-made model is free. A plan covers AI changes and the download.
Example prompt
Model a Pi 5 case with M.2 HAT+ and NVMe, 94×63×36 mm cavity, Active Cooler clearance, port openings, SSD vent grid, four M2.5 standoffs, 2 mm walls.
What a raspberry pi 5 m.2 hat+ nvme case is
A case for a Raspberry Pi 5 (85 × 56 mm) with the official M.2 HAT+ and a 2230 or 2242 NVMe drive on top. The cavity is 94 × 63 × 36 mm so the Active Cooler fits under the HAT, with openings for both micro-HDMI, USB-C, USB and Ethernet, a slot for the PCIe ribbon and a vent grid over the SSD. Walls are 2 mm with four M2.5 standoffs. Print the base flat in PETG.
A Pi 5 case without the HAT is about 12 mm too short, and a Pi 4 case misses the PCIe and power button. Open the ready-made model in SpeakCAD for free, adjust the height, then download the STL.
People also search
raspberry pi 5 nvme case stlpi 5 m.2 hat+ case 3d printraspberry pi 5 ssd casepi 5 nvme hat enclosure 3d model
Questions people ask about a raspberry pi 5 m.2 hat+ nvme case
A case for a Raspberry Pi 5 (85 × 56 mm) with the official M.2 HAT+ and a 2230 or 2242 NVMe drive on top. The cavity is 94 × 63 × 36 mm so the Active Cooler fits under the HAT, with openings for both micro-HDMI, USB-C, USB and Ethernet, a slot for the PCIe ribbon and a vent grid over the SSD. Walls are 2 mm with four M2.5 standoffs. Print the base flat in PETG.
Click Get it now on this page and sign in: you can open the ready-made model for free, and the example prompt is filled in if you want the AI to redesign it. The model renders in your browser, nothing to install. Change any millimetre in the viewer or the chat (AI changes use plan credits), then export a watertight STL or 3MF with a Maker or Pro plan when you want to print.
Start from this working example and replace any number with what you measured: Model a Pi 5 case with M.2 HAT+ and NVMe, 94×63×36 mm cavity, Active Cooler clearance, port openings, SSD vent grid, four M2.5 standoffs, 2 mm walls.
A Pi 5 case without the HAT is about 12 mm too short, and a Pi 4 case misses the PCIe and power button. In SpeakCAD you open the ready-made model for free, change it to your measurements, then download a file sized for the part you actually own.
No. SpeakCAD runs entirely in the browser: the chat, the 3D engine and the live viewer load in the tab. The only file you download is the finished STL or 3MF.
More enclosures & cases
Waveshare RP2040-Zero caseA tiny snap case for a Waveshare RP2040-Zero (18 × 23.5 mm).Raspberry Pi 3.5 inch TFT caseA case for a Raspberry Pi 4 or 3B+ (85 × 56 mm) with a 3.5 inch GPIO TFT on top.Senseair S8 CO2 sensor wall caseA wall case for a Senseair S8 NDIR module (33.5 × 20 × 8.5 mm) with its diffusion membrane facing a 20 × 12 mm grille of 1.5 mm slots.Vented housing for a temperature and humidity sensorA louvred shell for a DHT22, BME280 or similar sensor that shields it from direct light and drips while letting air circulate, so readings reflect the room r…Garmin Edge 1040 silicone-style bumper caseA flexible bumper printed in TPU that wraps the Garmin Edge 1040 and 1040 Solar (59.3 x 117.6 x 20 mm) to protect the corners in a crash and the screen edge…Kia EV6 key fob cover with lanyard loopA protective sleeve for the Kia EV6, Niro EV and Hyundai Ioniq 5 smart key, which shares the same 5-button fob body.