1
Brackets & mounts
Prusa MK4S LED light bar frame mount
This is not a fixed STL. SpeakCAD generates the prusa mk4s led light bar frame mount to your millimetres, you adjust it in the chat, then you download and print it.Building the 3D preview…
2
Adjust
Click a part and change its numbers in the viewer, or ask the AI in the chat: wall thickness, hole size, the thing it clips onto. AI changes use plan credits.3Print
Download a watertight STL or 3MF with a Maker or Pro plan, drop it in your slicer, and print it. Small fit fixes re-download free.
Get it nowOpening the ready-made model is free. A plan covers AI changes and the download.
Example prompt
Create an LED bar mount for the Prusa MK4S frame, 6.2 mm snap slot, 60 mm arm angled 30 degrees down, 12×8 mm channel for 10 mm LED strip.
What a prusa mk4s led light bar frame mount is
A pair of mounts that hang a 10 mm LED strip channel from the top of the MK4S frame, about 6 mm thick, lighting the bed for the camera and first-layer checks. Each mount has a 6.2 mm slot with a snap bump, a 60 mm arm tilting the light 30 degrees down, and a 12 × 8 mm channel for 10 mm wide 24 V strip or an aluminium profile. Print in PETG or ASA, on its side.
On an MK3S+ the frame is similar, but the MINI+ has no top frame at all. Open the mounts in SpeakCAD for free, change the angle or channel width in the viewer or the chat, then download the STL.
People also search
prusa mk4s led bar stlmk4 led light mountprusa led strip frame mountmk4s lighting 3d print
Questions people ask about a prusa mk4s led light bar frame mount
A pair of mounts that hang a 10 mm LED strip channel from the top of the MK4S frame, about 6 mm thick, lighting the bed for the camera and first-layer checks. Each mount has a 6.2 mm slot with a snap bump, a 60 mm arm tilting the light 30 degrees down, and a 12 × 8 mm channel for 10 mm wide 24 V strip or an aluminium profile. Print in PETG or ASA, on its side.
Click Get it now on this page and sign in: you can open the ready-made model for free, and the example prompt is filled in if you want the AI to redesign it. The model renders in your browser, nothing to install. Change any millimetre in the viewer or the chat (AI changes use plan credits), then export a watertight STL or 3MF with a Maker or Pro plan when you want to print.
Start from this working example and replace any number with what you measured: Create an LED bar mount for the Prusa MK4S frame, 6.2 mm snap slot, 60 mm arm angled 30 degrees down, 12×8 mm channel for 10 mm LED strip.
On an MK3S+ the frame is similar, but the MINI+ has no top frame at all. In SpeakCAD you open the ready-made model for free, change it to your measurements, then download a file sized for the part you actually own.
No. SpeakCAD runs entirely in the browser: the chat, the 3D engine and the live viewer load in the tab. The only file you download is the finished STL or 3MF.
More brackets & mounts
Bosch 18V GDR wall holsterA holster that parks a Bosch 18V GDR impact (about 140 mm) on a 4.5 mm hole pair.Dyson V11 wall dock skirting spacerA spacer that sits behind a Dyson V11 or V15 wall dock so the machine clears a skirting board instead of hitting it.Steam Deck OLED car headrest mountA back-seat headrest mount for a Steam Deck OLED (298 × 117 × 49 mm) that clamps both headrest posts (usually 12 to 14 mm, 140 to 160 mm apart) and holds the…iPhone 16 Pro Max car vent mount with MagSafe cutoutA cradle that hooks over a horizontal dashboard vent slat and holds an iPhone 16 Pro Max (163 x 77.6 x 8.25 mm) in portrait or landscape.Wyze Cam v3 corner wall mount with rain hoodA corner bracket for the Wyze Cam v3, a 51 x 53 x 58 mm camera with a 1/4 inch-20 thread in its base.Wyze Cam v4 eave mount with sun hoodAn eave bracket that hangs a Wyze Cam v4 (about 55 × 55 × 90 mm with the stand) under a soffit with a 20 mm sun hood.