1
Hobby & gaming
Pedalboard patch bay jack plate
This is not a fixed STL. SpeakCAD generates the pedalboard patch bay jack plate to your millimetres, you adjust it in the chat, then you download and print it.Building the 3D preview…
2
Adjust
Click a part and change its numbers in the viewer, or ask the AI in the chat: wall thickness, hole size, the thing it clips onto. AI changes use plan credits.3Print
Download a watertight STL or 3MF with a Maker or Pro plan, drop it in your slicer, and print it. Small fit fixes re-download free.
Get it nowOpening the ready-made model is free. A plan covers AI changes and the download.
Example prompt
Design a pedalboard patch bay, 100×40×3 mm face with two 9.5 mm jack holes and a 12 mm DC hole, 30 mm L-bracket with two 4 mm screw holes.
What a pedalboard patch bay jack plate is
A patch bay for the edge of a pedalboard so you plug the guitar and amp into the board instead of the first and last pedal. The 100 × 40 × 3 mm face has two 9.5 mm holes for 1/4 inch panel jacks, a 12 mm hole for a DC socket, and a 30 mm deep L-bracket with two 4 mm screw holes. Print on its back in PETG with 4 walls.
Some panel jacks need a 12 mm hole rather than 9.5 mm; measure the thread and tell the chat. Open the ready-made model in SpeakCAD for free, change the hole sizes or layout, then download the STL.
People also search
pedalboard patch bay stlpedalboard jack plate 3d printpedalboard input output paneldiy pedalboard patchbay
Questions people ask about a pedalboard patch bay jack plate
A patch bay for the edge of a pedalboard so you plug the guitar and amp into the board instead of the first and last pedal. The 100 × 40 × 3 mm face has two 9.5 mm holes for 1/4 inch panel jacks, a 12 mm hole for a DC socket, and a 30 mm deep L-bracket with two 4 mm screw holes. Print on its back in PETG with 4 walls.
Click Get it now on this page and sign in: you can open the ready-made model for free, and the example prompt is filled in if you want the AI to redesign it. The model renders in your browser, nothing to install. Change any millimetre in the viewer or the chat (AI changes use plan credits), then export a watertight STL or 3MF with a Maker or Pro plan when you want to print.
Start from this working example and replace any number with what you measured: Design a pedalboard patch bay, 100×40×3 mm face with two 9.5 mm jack holes and a 12 mm DC hole, 30 mm L-bracket with two 4 mm screw holes.
Some panel jacks need a 12 mm hole rather than 9.5 mm; measure the thread and tell the chat. In SpeakCAD you open the ready-made model for free, change it to your measurements, then download a file sized for the part you actually own.
No. SpeakCAD runs entirely in the browser: the chat, the 3D engine and the live viewer load in the tab. The only file you download is the finished STL or 3MF.
More hobby & gaming
PlayStation Portal desk stand with cable channelA stand for the PlayStation Portal remote player that supports the grips on either side of its 8 inch screen and tilts it back 20 degrees for a bedside or de…Apple Vision Pro 2 Light Seal standA desk stand that holds Apple Vision Pro 2 (about 200 mm wide) on its Light Seal so the displays stay off the desk.8BitDo Ultimate 2 charging-dock riserA 15 mm riser under an Ultimate 2 dock so a thicker aftermarket grip still seats on the pogo pins.PS VR2 headset stand with Sense controller cradlesA desk stand for a PlayStation VR2 (the headset is about 212 × 158 × 278 mm) with a 90 mm wide rounded head form, 220 mm tall, that carries the weight on the…Sim rig aluminium profile cable clipA snap-in cable clip for 40 series aluminium profile rigs with an 8 mm slot.Card deck box with sliding lidA deck box protects sleeved trading cards during transport and stops the stack spilling in a backpack.