1
Desk & office
PC case magnetic headset hanger
This is not a fixed STL. SpeakCAD generates the pc case magnetic headset hanger to your millimetres, you adjust it in the chat, then you download and print it.Building the 3D preview…
2
Adjust
Click a part and change its numbers in the viewer, or ask the AI in the chat: wall thickness, hole size, the thing it clips onto. AI changes use plan credits.3Print
Download a watertight STL or 3MF with a Maker or Pro plan, drop it in your slicer, and print it. Small fit fixes re-download free.
Get it nowOpening the ready-made model is free. A plan covers AI changes and the download.
Example prompt
Model a magnetic PC case headset hanger, 70×70 mm base with four 20×3 mm magnet pockets, 75 mm arm, 50 mm saddle, 5 mm lip, 3 mm walls.
What a pc case magnetic headset hanger is
A headset hanger that sticks to the steel side of a PC case with four 20 × 3 mm neodymium disc magnets pressed into a 70 × 70 mm base. The arm stands out 75 mm with a 50 mm wide rounded saddle and a 5 mm end lip, and a thin felt pad keeps the paint safe. Print on its side in PETG, 3 mm walls.
Tempered-glass and aluminium panels are not magnetic, so use tape there. Open the hanger in SpeakCAD at no cost, change any millimetre in the chat or the viewer, then download the STL.
People also search
magnetic headset holder stlpc case headset hanger 3d printheadset hook for pc casemagnetic headphone hook
Questions people ask about a pc case magnetic headset hanger
A headset hanger that sticks to the steel side of a PC case with four 20 × 3 mm neodymium disc magnets pressed into a 70 × 70 mm base. The arm stands out 75 mm with a 50 mm wide rounded saddle and a 5 mm end lip, and a thin felt pad keeps the paint safe. Print on its side in PETG, 3 mm walls.
Click Get it now on this page and sign in: you can open the ready-made model for free, and the example prompt is filled in if you want the AI to redesign it. The model renders in your browser, nothing to install. Change any millimetre in the viewer or the chat (AI changes use plan credits), then export a watertight STL or 3MF with a Maker or Pro plan when you want to print.
Start from this working example and replace any number with what you measured: Model a magnetic PC case headset hanger, 70×70 mm base with four 20×3 mm magnet pockets, 75 mm arm, 50 mm saddle, 5 mm lip, 3 mm walls.
Tempered-glass and aluminium panels are not magnetic, so use tape there. In SpeakCAD you open the ready-made model for free, change it to your measurements, then download a file sized for the part you actually own.
No. SpeakCAD runs entirely in the browser: the chat, the 3D engine and the live viewer load in the tab. The only file you download is the finished STL or 3MF.
More desk & office
Angled desk phone stand with cable slotA 60 degree cradle that holds a phone upright for video calls while a charging cable passes up through a slot in the base.Logitech Brio webcam clip for thin bezel monitorsA replacement clip for the Logitech Brio 4K webcam that grips a monitor with a bezel under 6 mm, which the stock mount slides off.COROS Pace 3 charger clip dockA bedside dock that holds a COROS Pace 3 (about 42 mm) on its pogo-clip charger at 20 degrees.MacBook Pro 16-inch M4 Pro vertical standA vertical stand for a 16-inch MacBook Pro M4 Pro (about 16.8 mm closed, 356 mm wide) with a 18 × 358 mm slot, a 24 mm MagSafe cutout and a 160 × 110 mm base.AirPods Pro 3 desk charging wellA well that parks an AirPods Pro 3 case (about 61 × 46 × 22 mm) on its USB-C or MagSafe side so the stem LEDs stay visible.Keychron Lemokey P1 palm restA 18 mm palm rest for a Lemokey P1 (about 370 × 140 mm) with a 8 mm front radius and four 3 mm foot recesses.