1
Brackets & mounts
NRF24L01 PA+LNA antenna module holder
This is not a fixed STL. SpeakCAD generates the nrf24l01 pa+lna antenna module holder to your millimetres, you adjust it in the chat, then you download and print it.Building the 3D preview…
2
Adjust
Click a part and change its numbers in the viewer, or ask the AI in the chat: wall thickness, hole size, the thing it clips onto. AI changes use plan credits.3Print
Download a watertight STL or 3MF with a Maker or Pro plan, drop it in your slicer, and print it. Small fit fixes re-download free.
Get it nowOpening the ready-made model is free. A plan covers AI changes and the download.
Example prompt
Design an NRF24L01 PA+LNA holder 43×18×10 mm, 6.5 mm SMA exit, 2×4 header slot, capacitor clip, 3.5 mm screw tab, 1.6 mm walls.
What a nrf24l01 pa+lna antenna module holder is
A holder for the NRF24L01+PA+LNA module (about 41 × 16 mm with the SMA antenna). The sleeve is 43 × 18 × 10 mm with a 6.5 mm SMA exit, a 2 × 4 pin header slot and a clip for a 10 µF capacitor, and a 3.5 mm screw tab fixes it inside a case. Walls are 1.6 mm. Print on its side in PETG.
The bare NRF24L01 with a PCB antenna is only 29 × 15 mm. Open the ready-made model in SpeakCAD for free, change the size in the viewer or the chat, then download the STL.
People also search
nrf24l01 holder stlnrf24l01 pa lna case 3d printnrf24 module mountnrf24l01 enclosure 3d model
Questions people ask about a nrf24l01 pa+lna antenna module holder
A holder for the NRF24L01+PA+LNA module (about 41 × 16 mm with the SMA antenna). The sleeve is 43 × 18 × 10 mm with a 6.5 mm SMA exit, a 2 × 4 pin header slot and a clip for a 10 µF capacitor, and a 3.5 mm screw tab fixes it inside a case. Walls are 1.6 mm. Print on its side in PETG.
Click Get it now on this page and sign in: you can open the ready-made model for free, and the example prompt is filled in if you want the AI to redesign it. The model renders in your browser, nothing to install. Change any millimetre in the viewer or the chat (AI changes use plan credits), then export a watertight STL or 3MF with a Maker or Pro plan when you want to print.
Start from this working example and replace any number with what you measured: Design an NRF24L01 PA+LNA holder 43×18×10 mm, 6.5 mm SMA exit, 2×4 header slot, capacitor clip, 3.5 mm screw tab, 1.6 mm walls.
The bare NRF24L01 with a PCB antenna is only 29 × 15 mm. In SpeakCAD you open the ready-made model for free, change it to your measurements, then download a file sized for the part you actually own.
No. SpeakCAD runs entirely in the browser: the chat, the 3D engine and the live viewer load in the tab. The only file you download is the finished STL or 3MF.
More brackets & mounts
28BYJ-48 stepper motor mountA mount for a 28BYJ-48 stepper (28 mm body, flange holes 35 mm apart, 5 mm D-flat shaft offset 8 mm from the centre).DIN rail clip for mounting a small PCBA snap-on clip for standard 35 mm top-hat DIN rail with a flat platform for a small circuit board.Brompton handlebar mount for Garmin Edge computersBrompton M and S bars have a 22.2 mm grip section and very little real estate once the brake levers and shifter are on, so a normal out-front mount does not…Wall Control pegboard hook for Milwaukee M12 toolsA cradle that hooks onto Wall Control metal pegboard and hangs Milwaukee M12 tools such as the Fuel drill, impact driver or ratchet by their battery foot, wi…Aqara Presence Sensor FP2 45-degree corner bracketA corner bracket that aims an Aqara FP2 presence sensor (about 64 × 64 × 28 mm) at 45 degrees across a room.Dyson V10 Animal mini-motorhead clipA clip that hangs the V10 Animal mini motorhead on the wand so pet stairs are not a two-trip job.