1
Desk & office
Novation Launchpad Mini MK3 stand
This is not a fixed STL. SpeakCAD generates the novation launchpad mini mk3 stand to your millimetres, you adjust it in the chat, then you download and print it.Building the 3D preview…
2
Adjust
Click a part and change its numbers in the viewer, or ask the AI in the chat: wall thickness, hole size, the thing it clips onto. AI changes use plan credits.3Print
Download a watertight STL or 3MF with a Maker or Pro plan, drop it in your slicer, and print it. Small fit fixes re-download free.
Get it nowOpening the ready-made model is free. A plan covers AI changes and the download.
Example prompt
Design a 20° stand for a Novation Launchpad Mini MK3, 181×181 mm cradle, 10 mm side walls, 3 mm front lip, 12×8 mm USB-C cutout.
What a novation launchpad mini mk3 stand is
A stand that tilts a Novation Launchpad Mini MK3 (180 × 180 × 18 mm) 20° towards you. The cradle is 181 × 181 mm with 10 mm side walls, a 3 mm front lip and a 12 × 8 mm cutout at the back for the USB-C lead, and the base has a slot to store the cable. Print flat in PLA or PETG with 2 mm walls.
The Launchpad X is larger (about 241 mm square) and will not fit the cradle. Open the ready-made model in SpeakCAD for free, change the angle in the viewer or the chat, then download the STL.
People also search
launchpad mini mk3 stand stllaunchpad mini stand 3d printnovation launchpad mini standmidi controller stand
Questions people ask about a novation launchpad mini mk3 stand
A stand that tilts a Novation Launchpad Mini MK3 (180 × 180 × 18 mm) 20° towards you. The cradle is 181 × 181 mm with 10 mm side walls, a 3 mm front lip and a 12 × 8 mm cutout at the back for the USB-C lead, and the base has a slot to store the cable. Print flat in PLA or PETG with 2 mm walls.
Click Get it now on this page and sign in: you can open the ready-made model for free, and the example prompt is filled in if you want the AI to redesign it. The model renders in your browser, nothing to install. Change any millimetre in the viewer or the chat (AI changes use plan credits), then export a watertight STL or 3MF with a Maker or Pro plan when you want to print.
Start from this working example and replace any number with what you measured: Design a 20° stand for a Novation Launchpad Mini MK3, 181×181 mm cradle, 10 mm side walls, 3 mm front lip, 12×8 mm USB-C cutout.
The Launchpad X is larger (about 241 mm square) and will not fit the cradle. In SpeakCAD you open the ready-made model for free, change it to your measurements, then download a file sized for the part you actually own.
No. SpeakCAD runs entirely in the browser: the chat, the 3D engine and the live viewer load in the tab. The only file you download is the finished STL or 3MF.
More desk & office
Focusrite Scarlett 2i2 4th Gen angled desk standA desk stand that tilts a Focusrite Scarlett 2i2 4th Gen or Scarlett Solo (the 2i2 is 180 x 47.5 x 117 mm) back 25 degrees so the gain halos and Air button f…Polar Vantage V3 charger cradleA cradle that holds a Vantage V3 on its four-pogo cable at 15 degrees, 48 mm nest.Magic Mouse 2 charging flip standA stand that holds a Magic Mouse 2 / USB-C Magic Mouse on its side so you can charge it without the cable pointing at the ceiling.Philips Hue Iris desk cable channelA channel that hides the Hue Iris power brick (about 70 × 40 × 25 mm) and USB-C lead behind a desk so the lamp sits clean on a shelf.Samsung The Frame soundbar gap shimA shim that sits between a The Frame (2024/2025) and a soundbar so the Slim Fit Cam still sees the room.Sticky note caddy with pen grooveA compact holder that keeps a 76 mm square pad of sticky notes flat and a pen in a groove alongside.