1
Brackets & mounts
MSI Claw A1M wall mount
This is not a fixed STL. SpeakCAD generates the msi claw a1m wall mount to your millimetres, you adjust it in the chat, then you download and print it.Building the 3D preview…
2
Adjust
Click a part and change its numbers in the viewer, or ask the AI in the chat: wall thickness, hole size, the thing it clips onto. AI changes use plan credits.3Print
Download a watertight STL or 3MF with a Maker or Pro plan, drop it in your slicer, and print it. Small fit fixes re-download free.
Get it nowOpening the ready-made model is free. A plan covers AI changes and the download.
Example prompt
Design an MSI Claw A1M wall mount, 230×40 mm plate, two grip cups 42 mm wide 42 mm deep, open top for USB-C, three 4 mm holes, 3 mm walls.
What a msi claw a1m wall mount is
A wall mount for the original MSI Claw A1M (294 × 117 × 21.2 mm at the body, about 40 mm deep at the grips) with two grip cups 42 mm wide and 42 mm deep, 1 mm clearance, and an open top so the USB-C port stays reachable. The plate is 230 × 40 mm with three 4 mm holes. Print in PETG, 3 mm walls.
The newer Claw 8 AI+ is taller at 126 mm and wider, so it needs its own cups. Open the mount in SpeakCAD at no cost, edit any millimetre in the viewer or the chat, then download the STL.
People also search
msi claw wall mount stlmsi claw a1m holder 3d printmsi claw wall cradlemsi claw a1m mount
Questions people ask about a msi claw a1m wall mount
A wall mount for the original MSI Claw A1M (294 × 117 × 21.2 mm at the body, about 40 mm deep at the grips) with two grip cups 42 mm wide and 42 mm deep, 1 mm clearance, and an open top so the USB-C port stays reachable. The plate is 230 × 40 mm with three 4 mm holes. Print in PETG, 3 mm walls.
Click Get it now on this page and sign in: you can open the ready-made model for free, and the example prompt is filled in if you want the AI to redesign it. The model renders in your browser, nothing to install. Change any millimetre in the viewer or the chat (AI changes use plan credits), then export a watertight STL or 3MF with a Maker or Pro plan when you want to print.
Start from this working example and replace any number with what you measured: Design an MSI Claw A1M wall mount, 230×40 mm plate, two grip cups 42 mm wide 42 mm deep, open top for USB-C, three 4 mm holes, 3 mm walls.
The newer Claw 8 AI+ is taller at 126 mm and wider, so it needs its own cups. In SpeakCAD you open the ready-made model for free, change it to your measurements, then download a file sized for the part you actually own.
No. SpeakCAD runs entirely in the browser: the chat, the 3D engine and the live viewer load in the tab. The only file you download is the finished STL or 3MF.
More brackets & mounts
Home Assistant Green wall mountA wall mount that holds a Home Assistant Green with a 14 mm Ethernet cutout and two 4.5 mm holes.M5Stack AtomS3 Lite mountA mount that holds an M5Stack AtomS3 Lite (24 × 24 × about 10 mm) on a wall, desk or 2020 extrusion.Tesla Model Y Juniper screen-edge phone holderA spring-free phone holder that clamps to the right edge of the 15.4 inch screen in a 2025 Model Y Juniper and carries a cradle for phones 70 to 80 mm wide.Xbox Series X under desk mountAn under-desk mount for an Xbox Series X lying on its side (301 × 151 × 151 mm).Quad Lock wall mount plate for shower or workshopA flat plate with a Quad Lock style twist-lock recess so any phone in a Quad Lock case snaps onto a shower wall, a workshop board or the side of a fridge.Ryobi ONE+ battery wall mount strip for 18V packsA strip of sockets for Ryobi ONE+ 18V batteries, from the slim 1.5 Ah to the 6 Ah High Performance packs, which all share the same stem.