1
The prompt on this page opens in SpeakCAD already filled in — after sign-in too. The model renders in your browser. Preview is free.Organizers & storage
Milwaukee Packout crate bottle holder
This is not a fixed STL. SpeakCAD generates the milwaukee packout crate bottle holder to your millimetres, you adjust it in the chat, then you download and print it.2
Change any millimetre in the chat: wall thickness, hole size, the thing it clips onto. Iterations stay in the tab until it matches what you own.Adjust
3Print
Download a watertight STL or 3MF for 2 credits, drop it in your slicer, and print it. Small fit fixes re-download free.Get it nowThe example prompt comes with you, even through sign-in. Preview is free; a download costs 2 credits.
What a milwaukee packout crate bottle holder is
A holder that drops into a Packout crate and parks a 70 mm water bottle plus a 55 mm spray can so they do not tip when you roll. The plate is 160 × 80 × 50 mm with two wells. Print in PETG with 2 mm walls.
Bottles in a crate fall over. In SpeakCAD you set bottle diameter, preview the holder in the browser at no cost, then download the STL.
Example prompt
Design a Packout crate bottle holder 160×80×50 mm, 72 mm and 57 mm wells, 2 mm PETG.
People also search
packout crate bottle stlmilwaukee packout drink holder 3d printpackout crate cup holderpackout bottle insert 3d model
Questions people ask about a milwaukee packout crate bottle holder
A holder that drops into a Packout crate and parks a 70 mm water bottle plus a 55 mm spray can so they do not tip when you roll. The plate is 160 × 80 × 50 mm with two wells. Print in PETG with 2 mm walls.
Click Get it now on this page: the example prompt is filled in for you after you sign in. The model renders in your browser — nothing to install — and previewing is free. Adjust any millimetre in the chat, then export a watertight STL or 3MF for 2 credits when you want to print.
Start from this working example and replace any number with what you measured: Design a Packout crate bottle holder 160×80×50 mm, 72 mm and 57 mm wells, 2 mm PETG.
Bottles in a crate fall over. In SpeakCAD you generate and preview for free, then download a file sized for the part you actually own.
No. SpeakCAD runs entirely in the browser: the chat, the 3D engine and the live viewer load in the tab. The only file you download is the finished STL or 3MF.
More organizers & storage
Dyson Purifier Cool Gen2 remote trayA tray that parks the curved Purifier Cool Gen2 remote (about 110 × 40 × 12 mm) on the tower so it stops vanishing behind the sofa.DeWalt TSTAK deep-box divider setDividers that split a TSTAK deep box into four 150 × 140 mm wells for fittings.Glasses stand for several pairs of spectaclesA tiered stand that holds reading glasses, sunglasses and spare frames open-armed, lenses facing out and never touching a surface.Festool Systainer insert for Domino cutters and drill bitsA foam-free insert that sits in the bottom of a Festool Systainer SYS3 M 137 and keeps Domino DF 500 cutters, spare bits and the wrench in fixed pockets.Dr. Brown's bottle vent and insert organizer trayA tray that gives the many small parts of Dr.RIDGID Pro Gear stack bit caddyA caddy that drops into a RIDGID Pro Gear stack drawer and holds 40 hex bits in 6.6 mm pockets plus two 12 mm driver shafts.