1
Brackets & mounts
MikroTik hAP ac lite wall mount
This is not a fixed STL. SpeakCAD generates the mikrotik hap ac lite wall mount to your millimetres, you adjust it in the chat, then you download and print it.Building the 3D preview…
2
Adjust
Click a part and change its numbers in the viewer, or ask the AI in the chat: wall thickness, hole size, the thing it clips onto. AI changes use plan credits.3Print
Download a watertight STL or 3MF with a Maker or Pro plan, drop it in your slicer, and print it. Small fit fixes re-download free.
Get it nowOpening the ready-made model is free. A plan covers AI changes and the download.
Example prompt
Design a hAP ac lite wall cradle, 114×29 mm on-edge pocket, open bottom for ports, vented faces, two 4 mm holes, 2 mm PETG.
What a mikrotik hap ac lite wall mount is
A wall cradle for a MikroTik hAP ac lite (113 × 89 × 28 mm) that holds it on edge with the ports facing down, so cables drop straight to the floor. The cradle is 114 × 29 mm with 0.5 mm clearance, open at the bottom for the five Ethernet ports and the barrel jack, vented on both faces, with two 4 mm holes. Print in PETG, 2 mm walls.
The hAP ax lite and hAP ax2 have different shells, so check your model. Open the ready-made mount in SpeakCAD for free, change any millimetre in the viewer or the chat, then download the STL.
People also search
hap ac lite wall mount stlmikrotik hap mount 3d printmikrotik router brackethap ac lite holder 3d model
Questions people ask about a mikrotik hap ac lite wall mount
A wall cradle for a MikroTik hAP ac lite (113 × 89 × 28 mm) that holds it on edge with the ports facing down, so cables drop straight to the floor. The cradle is 114 × 29 mm with 0.5 mm clearance, open at the bottom for the five Ethernet ports and the barrel jack, vented on both faces, with two 4 mm holes. Print in PETG, 2 mm walls.
Click Get it now on this page and sign in: you can open the ready-made model for free, and the example prompt is filled in if you want the AI to redesign it. The model renders in your browser, nothing to install. Change any millimetre in the viewer or the chat (AI changes use plan credits), then export a watertight STL or 3MF with a Maker or Pro plan when you want to print.
Start from this working example and replace any number with what you measured: Design a hAP ac lite wall cradle, 114×29 mm on-edge pocket, open bottom for ports, vented faces, two 4 mm holes, 2 mm PETG.
The hAP ax lite and hAP ax2 have different shells, so check your model. In SpeakCAD you open the ready-made model for free, change it to your measurements, then download a file sized for the part you actually own.
No. SpeakCAD runs entirely in the browser: the chat, the 3D engine and the live viewer load in the tab. The only file you download is the finished STL or 3MF.
More brackets & mounts
Sonoff ZBDongle-P USB extension holderA wall holder for a Sonoff ZBDongle-P (about 65 × 27 × 11 mm without the antenna) on a USB extension cable, so the coordinator sits 1 m away from the USB 3 p…VESA bracket for a mini PC behind a monitorA plate that bolts to the 100 x 100 mm VESA holes behind a monitor and holds a small form-factor PC in a cradle, freeing desk space and hiding cables.Ski and snowboard wall rack bracketA wall bracket for a pair of skis or a snowboard, with two 150 mm arms that hang skis tips-up by the brakes or bindings, or a single 30 mm slot version that…Elegoo Neptune 4 build plate wall hanger rackA wall rack that stores three spare Elegoo Neptune 4 or Neptune 4 Pro flexible PEI plates (235 by 235 mm) on edge so the coating never touches another plate.Air-hose reel wall guide 8 mmA wall guide that keeps an 8 mm ID air hose from rubbing the reel cheek, 40 mm ring with a 4.5 mm hole pair.IKEA EKET cabinet anti-tip bracketA bracket that ties an EKET cube (35 × 35 cm) to the wall so a stacked tower cannot tip.