1
Enclosures & cases
MAX7219 8×32 LED matrix clock case
This is not a fixed STL. SpeakCAD generates the max7219 8×32 led matrix clock case to your millimetres, you adjust it in the chat, then you download and print it.Building the 3D preview…
2
Adjust
Click a part and change its numbers in the viewer, or ask the AI in the chat: wall thickness, hole size, the thing it clips onto. AI changes use plan credits.3Print
Download a watertight STL or 3MF with a Maker or Pro plan, drop it in your slicer, and print it. Small fit fixes re-download free.
Get it nowOpening the ready-made model is free. A plan covers AI changes and the download.
Example prompt
Design a MAX7219 8×32 clock case 136×40×45 mm, 128×32 mm front window, diffuser recess, room for D1 mini and DS3231, USB slot.
What a max7219 8×32 led matrix clock case is
A clock case for a 4-in-1 MAX7219 8×32 LED matrix (128 × 32 mm) driven by a Wemos D1 mini or ESP32. The front has a 128 × 32 mm window for a smoked acrylic or 0.6 mm printed diffuser, the body is 136 × 40 × 45 mm with room for the controller and a DS3231, and the back has a USB cable slot. Walls are 2 mm. Print the front face-down in black PLA.
The 8×8 single modules are 32 × 32 mm, so four loose ones do not match the 4-in-1 pitch. Open the ready-made model in SpeakCAD for free, adjust any millimetre, then download the STL.
People also search
max7219 clock case stl8x32 led matrix enclosure 3d printmax7219 matrix caseled matrix clock box 3d model
Questions people ask about a max7219 8×32 led matrix clock case
A clock case for a 4-in-1 MAX7219 8×32 LED matrix (128 × 32 mm) driven by a Wemos D1 mini or ESP32. The front has a 128 × 32 mm window for a smoked acrylic or 0.6 mm printed diffuser, the body is 136 × 40 × 45 mm with room for the controller and a DS3231, and the back has a USB cable slot. Walls are 2 mm. Print the front face-down in black PLA.
Click Get it now on this page and sign in: you can open the ready-made model for free, and the example prompt is filled in if you want the AI to redesign it. The model renders in your browser, nothing to install. Change any millimetre in the viewer or the chat (AI changes use plan credits), then export a watertight STL or 3MF with a Maker or Pro plan when you want to print.
Start from this working example and replace any number with what you measured: Design a MAX7219 8×32 clock case 136×40×45 mm, 128×32 mm front window, diffuser recess, room for D1 mini and DS3231, USB slot.
The 8×8 single modules are 32 × 32 mm, so four loose ones do not match the 4-in-1 pitch. In SpeakCAD you open the ready-made model for free, change it to your measurements, then download a file sized for the part you actually own.
No. SpeakCAD runs entirely in the browser: the chat, the 3D engine and the live viewer load in the tab. The only file you download is the finished STL or 3MF.
More enclosures & cases
Flipper Zero hard shell case with GPIO coverA bumper-style protective shell for the Flipper Zero, whose body is 100 x 40 x 25 mm.Matter Thread border-router case for nRFA vented case for an nRF52840 Thread border-router board with SMA and USB-C cutouts.Raspberry Pi 3B+ caseA two-part case for a Raspberry Pi 3 Model B+ (85 × 56 mm).2S BMS and 18650 pack holderA holder for two 18650 cells in series (each 18 × 65 mm) with a 2S BMS board (about 46 × 20 mm) on the side.ESPHome thermostat wall box with OLEDA wall box for a DIY ESPHome thermostat: an ESP32 DevKitC (54.4 × 27.9 mm), a 0.96 inch SSD1306 OLED (27 × 27 mm module) behind a 23 × 12 mm window and two 1…Battery pack case for three AA cells with switchA compact holder for three AA cells side by side, with a slot for a standard 19 x 13 mm slide switch and a wire exit, giving a 4.5 V supply for LED strips, s…