1
The prompt on this page opens in SpeakCAD already filled in — after sign-in too. The model renders in your browser. Preview is free.Desk & office
MagSafe 3 cable comb for a desk edge
This is not a fixed STL. SpeakCAD generates the magsafe 3 cable comb for a desk edge to your millimetres, you adjust it in the chat, then you download and print it.2
Change any millimetre in the chat: wall thickness, hole size, the thing it clips onto. Iterations stay in the tab until it matches what you own.Adjust
3Print
Download a watertight STL or 3MF for 2 credits, drop it in your slicer, and print it. Small fit fixes re-download free.Get it nowThe example prompt comes with you, even through sign-in. Preview is free; a download costs 2 credits.
What a magsafe 3 cable comb for a desk edge is
A comb that parks a MagSafe 3 lead plus two USB-C cables along a 15–32 mm desk edge so the 13 mm MagSafe head sits at MacBook height. Three saddles are 6.5, 6.5 and 13 mm ID on 18 mm centres, the clamp uses an M5 thumb screw, and the body is 70 × 28 × 22 mm. Print in PETG on its back with 2 mm walls.
A loose MagSafe tip scratches aluminium when it drops. In SpeakCAD you set desk thickness and cable count, preview the comb in the browser for free, then download the STL.
Example prompt
Create a MagSafe 3 desk-edge cable comb 70×28×22 mm, saddles 6.5/6.5/13 mm ID, clamp for 15–32 mm desks, M5 thumb screw, 2 mm PETG walls.
People also search
magsafe 3 cable comb stlmagsafe desk cable organizer 3d printmacbook magsafe cable holdermagsafe 3 desk comb 3d model
Questions people ask about a magsafe 3 cable comb for a desk edge
A comb that parks a MagSafe 3 lead plus two USB-C cables along a 15–32 mm desk edge so the 13 mm MagSafe head sits at MacBook height. Three saddles are 6.5, 6.5 and 13 mm ID on 18 mm centres, the clamp uses an M5 thumb screw, and the body is 70 × 28 × 22 mm. Print in PETG on its back with 2 mm walls.
Click Get it now on this page: the example prompt is filled in for you after you sign in. The model renders in your browser — nothing to install — and previewing is free. Adjust any millimetre in the chat, then export a watertight STL or 3MF for 2 credits when you want to print.
Start from this working example and replace any number with what you measured: Create a MagSafe 3 desk-edge cable comb 70×28×22 mm, saddles 6.5/6.5/13 mm ID, clamp for 15–32 mm desks, M5 thumb screw, 2 mm PETG walls.
A loose MagSafe tip scratches aluminium when it drops. In SpeakCAD you generate and preview for free, then download a file sized for the part you actually own.
No. SpeakCAD runs entirely in the browser: the chat, the 3D engine and the live viewer load in the tab. The only file you download is the finished STL or 3MF.
More desk & office
Anker MagGo Qi2 charger puck desk standAn angled desk stand for the round Anker MagGo Qi2 wireless charging pad, so a Qi2 phone such as an iPhone 16 or Galaxy S25 stands at 60 degrees for video ca…Garmin Forerunner 970 bedside charger standA small bedside stand for a Garmin Forerunner 970 (about 47 mm) that holds the watch on its clip charger at 25 degrees so the display is readable from the pi…Arturia MiniLab 3 angled feetReplacement rear feet that put a MiniLab 3 at 8 degrees, 20 × 12 × 10 mm with the stock 4 mm pin.Magic Trackpad 2 angled desk wedgeA 8 degree wedge under a Magic Trackpad 2 / USB-C Trackpad (about 160 × 115 mm) so the front edge matches a Magic Keyboard.Dyson OnTrac charging-case standA stand that parks a Dyson OnTrac charging case (about 80 × 70 × 40 mm) at 20 degrees so the earbuds face up on a nightstand.Samsung Galaxy S25 Ultra desk standA stand that holds a Galaxy S25 Ultra (about 163 × 79 × 8.2 mm) at 55 degrees with a 14 mm USB-C slot and a 7.2 mm S Pen well.