1
Hobby & gaming
Lenovo Legion Go S desk stand
This is not a fixed STL. SpeakCAD generates the lenovo legion go s desk stand to your millimetres, you adjust it in the chat, then you download and print it.Building the 3D preview…
2
Adjust
Click a part and change its numbers in the viewer, or ask the AI in the chat: wall thickness, hole size, the thing it clips onto. AI changes use plan credits.3Print
Download a watertight STL or 3MF with a Maker or Pro plan, drop it in your slicer, and print it. Small fit fixes re-download free.
Get it nowOpening the ready-made model is free. A plan covers AI changes and the download.
Example prompt
Design a Legion Go S desk stand, 210×95 mm base, 60 degree back, 46 mm deep ledge, 30 mm cable gap, 3 mm walls.
What a lenovo legion go s desk stand is
A desk stand for the Lenovo Legion Go S (about 300 × 128 mm, 22.6 mm at the body and about 44 mm deep at the grips) that tilts it back 60 degrees on a 46 mm deep ledge. A 30 mm gap in the ledge lets a USB-C cable run up the back to the top ports, and the base is 210 × 95 mm with TPU foot pockets. Print on its side in PETG, 3 mm walls.
The first Legion Go has detachable controllers and a built-in kickstand, and it is a different shape. Open the ready-made stand in SpeakCAD for free, change any millimetre in the viewer or the chat, then download the STL.
People also search
legion go s stand stllegion go s desk stand 3d printlenovo legion go s holderlegion go s stand 3d model
Questions people ask about a lenovo legion go s desk stand
A desk stand for the Lenovo Legion Go S (about 300 × 128 mm, 22.6 mm at the body and about 44 mm deep at the grips) that tilts it back 60 degrees on a 46 mm deep ledge. A 30 mm gap in the ledge lets a USB-C cable run up the back to the top ports, and the base is 210 × 95 mm with TPU foot pockets. Print on its side in PETG, 3 mm walls.
Click Get it now on this page and sign in: you can open the ready-made model for free, and the example prompt is filled in if you want the AI to redesign it. The model renders in your browser, nothing to install. Change any millimetre in the viewer or the chat (AI changes use plan credits), then export a watertight STL or 3MF with a Maker or Pro plan when you want to print.
Start from this working example and replace any number with what you measured: Design a Legion Go S desk stand, 210×95 mm base, 60 degree back, 46 mm deep ledge, 30 mm cable gap, 3 mm walls.
The first Legion Go has detachable controllers and a built-in kickstand, and it is a different shape. In SpeakCAD you open the ready-made model for free, change it to your measurements, then download a file sized for the part you actually own.
No. SpeakCAD runs entirely in the browser: the chat, the 3D engine and the live viewer load in the tab. The only file you download is the finished STL or 3MF.
More hobby & gaming
LeapFrog LeapReader pen standA stand that parks a LeapReader pen in a 14 mm well with a 40 mm book rest.Strymon Iridium pedalboard riserA 15 mm riser for an Iridium so the jacks clear a packed board, 110 × 70 mm.MSI Claw 8 AI+ desk standA desk stand for the MSI Claw 8 AI+ (299.5 × 126.2 mm, 24.2 mm at the body and deeper at the grips) that holds it at 60 degrees on a 42 mm deep ledge.Mooer micro pedal double riserA riser that holds two Mooer micro pedals (93.5 × 42 × 52 mm each) side by side and 18 mm higher than the row in front.Desk clamp headset hangerA headset hanger clamps to the edge of a desk and holds a gaming headset off the surface where it would otherwise gather cables and crumbs.PlayStation Portal desk stand with cable channelA stand for the PlayStation Portal remote player that supports the grips on either side of its 8 inch screen and tilts it back 20 degrees for a bedside or de…