1
Brackets & mounts
Insta360 X4 bike handlebar 1/4-20 mount
This is not a fixed STL. SpeakCAD generates the insta360 x4 bike handlebar 1/4-20 mount to your millimetres, you adjust it in the chat, then you download and print it.Building the 3D preview…
2
Adjust
Click a part and change its numbers in the viewer, or ask the AI in the chat: wall thickness, hole size, the thing it clips onto. AI changes use plan credits.3Print
Download a watertight STL or 3MF with a Maker or Pro plan, drop it in your slicer, and print it. Small fit fixes re-download free.
Get it nowOpening the ready-made model is free. A plan covers AI changes and the download.
Example prompt
Create a 31.8 mm handlebar mount with captive 1/4-20 bolt 15 mm above the bar for an Insta360 X4, two M4 bolts, 22.2 mm shim, PETG.
What a insta360 x4 bike handlebar 1/4-20 mount is
A handlebar clamp for 31.8 mm bars with a captive 1/4-20 bolt on top, so an Insta360 X4 (46 × 123.6 × 37.6 mm) or a selfie stick screws straight on. It closes with two M4 bolts, the stud sits 15 mm above the bar, and a 22.2 mm shim fits flat bars. Print the halves flat in PETG with 100 percent infill around the bolt.
The X4 is heavy for its size, so tighten the clamp well on rough gravel. Open the ready-made mount in SpeakCAD for free, adjust any millimetre in the viewer or the chat, then download the STL.
People also search
insta360 x4 bike mountinsta360 handlebar mount stl1/4-20 handlebar mount 3d printinsta360 x4 handlebar
Questions people ask about a insta360 x4 bike handlebar 1/4-20 mount
A handlebar clamp for 31.8 mm bars with a captive 1/4-20 bolt on top, so an Insta360 X4 (46 × 123.6 × 37.6 mm) or a selfie stick screws straight on. It closes with two M4 bolts, the stud sits 15 mm above the bar, and a 22.2 mm shim fits flat bars. Print the halves flat in PETG with 100 percent infill around the bolt.
Click Get it now on this page and sign in: you can open the ready-made model for free, and the example prompt is filled in if you want the AI to redesign it. The model renders in your browser, nothing to install. Change any millimetre in the viewer or the chat (AI changes use plan credits), then export a watertight STL or 3MF with a Maker or Pro plan when you want to print.
Start from this working example and replace any number with what you measured: Create a 31.8 mm handlebar mount with captive 1/4-20 bolt 15 mm above the bar for an Insta360 X4, two M4 bolts, 22.2 mm shim, PETG.
The X4 is heavy for its size, so tighten the clamp well on rough gravel. In SpeakCAD you open the ready-made model for free, change it to your measurements, then download a file sized for the part you actually own.
No. SpeakCAD runs entirely in the browser: the chat, the 3D engine and the live viewer load in the tab. The only file you download is the finished STL or 3MF.
More brackets & mounts
Canon EOS R6 Mark II Arca-Swiss plateA low-profile Arca-Swiss plate for the Canon EOS R6 Mark II (138.4 × 98.4 × 88.4 mm).Google Pixel 9 Pro XL shower phone holder suctionA splash-tolerant cradle that holds a Google Pixel 9 Pro XL (162.8 x 76.6 x 8.5 mm) on shower tiles for podcasts and playlists.Wall Control pegboard hook for Milwaukee M12 toolsA cradle that hooks onto Wall Control metal pegboard and hangs Milwaukee M12 tools such as the Fuel drill, impact driver or ratchet by their battery foot, wi…Hatch Restore 2 wall shelf with cable slotA 160 mm shelf that holds a Restore 2 and drops the USB-C through a 8 mm slot so the nightstand stays clear.Peloton Tread+ tablet riserA 30 mm riser that lifts a phone or small tablet on a Tread+ console so it sits above the official screen bezel.Shower curtain rail wall bracket for 25 mm railA wall bracket for 25 mm shower curtain rails, the end fixing that holds a straight rail between two walls.