Kitchen & home

In-drawer knife block with angled slots

A low block that lies in a drawer and holds kitchen knives by their blades in angled slots. Slots are 3 mm wide for blades up to 2.5 mm thick and tilt 20 degrees so handles rest on a ledge, blades are separated by 15 mm walls, and slot depths step from 100 to 220 mm. The block is 30 mm tall with a 3 mm floor, rounded 4 mm edges and prints on its back.

Knife sets differ in blade count, width and length, so an organizer generated to your knives holds each one snug and leaves no wasted slot. Describe the set to SpeakCAD, preview the block in the browser for free, add a slot for kitchen shears or a sharpening rod, and download the STL once every knife has a place.

Get it nowGenerate and preview for free, in your browser. A download costs 2 credits.

Create an in-drawer knife block 380 mm long, 140 mm wide and 30 mm tall with seven 3 mm slots angled 20 degrees, depths stepping from 100 to 220 mm, 15 mm walls between slots, a 20 mm handle ledge along the front, 4 mm rounded edges.

Change any number to match what you measured. The AI keeps the rest of the design consistent, and small follow-up edits after a download are free.

More kitchen & home

Cotton swab dispenser with lift lidA bathroom box that stores cotton swabs upright.Nespresso Vertuo pod holder drawer under the machineA slim drawer unit that slides under a Nespresso Vertuo Next or Vertuo Pop so the machine sits on top and the capsules live underneath.Breville Barista Express 54 mm portafilter tamping stationA tamping station that cradles the 54 mm portafilter of a Breville or Sage Barista Express, Barista Pro or Bambino at a comfortable angle, with a pocket for…Vitamix tamper holder clip for the container baseA clip that holds the Vitamix tamper upright next to the motor base so it is never rolling around a drawer or lying wet on the counter.Philips Avent baby bottle drying rack with nipple pegsA compact drying rack for Philips Avent Natural bottles with pegs for the wide nipples, screw rings and caps that always end up in a puddle beside the sink.Cutlery tray sized to your kitchen drawerA five-section cutlery tray built to the exact internal width and depth of a kitchen drawer so it does not slide about or waste space at the sides.

Make your in-drawer knife block with angled slots now

Nothing to install and no CAD skills needed. Describe it, watch it render, download the STL or 3MF and print it tonight.

Get it nowBrowse the library
Looking for a ready-made version? Check the marketplace, where makers sell finished, rated models for credits.