1
The prompt on this page opens in SpeakCAD already filled in — after sign-in too. The model renders in your browser. Preview is free.Organizers & storage
IKEA PAX KOMPLEMENT 50 cm tray divider
This is not a fixed STL. SpeakCAD generates the ikea pax komplement 50 cm tray divider to your millimetres, you adjust it in the chat, then you download and print it.2
Change any millimetre in the chat: wall thickness, hole size, the thing it clips onto. Iterations stay in the tab until it matches what you own.Adjust
3Print
Download a watertight STL or 3MF for 2 credits, drop it in your slicer, and print it. Small fit fixes re-download free.Get it nowThe example prompt comes with you, even through sign-in. Preview is free; a download costs 2 credits.
What a ikea pax komplement 50 cm tray divider is
A divider that splits a 50 cm KOMPLEMENT pull-out tray (about 464 mm internal) for belts and ties. The wall is 460 × 40 × 2.4 mm with a 5 mm top lip. Print standing on the lip in PETG.
The 60 cm drawer divider is deeper. Tell SpeakCAD 50 vs 75 cm, preview the divider in the browser without paying, then download the STL.
Example prompt
Model a KOMPLEMENT 50 cm tray divider 460×40×2.4 mm with a 5 mm top lip, PETG.
People also search
pax tray divider stlkomplement 50cm divider 3d printikea pax belt tray splitpax pull out divider 3d model
Questions people ask about a ikea pax komplement 50 cm tray divider
A divider that splits a 50 cm KOMPLEMENT pull-out tray (about 464 mm internal) for belts and ties. The wall is 460 × 40 × 2.4 mm with a 5 mm top lip. Print standing on the lip in PETG.
Click Get it now on this page: the example prompt is filled in for you after you sign in. The model renders in your browser — nothing to install — and previewing is free. Adjust any millimetre in the chat, then export a watertight STL or 3MF for 2 credits when you want to print.
Start from this working example and replace any number with what you measured: Model a KOMPLEMENT 50 cm tray divider 460×40×2.4 mm with a 5 mm top lip, PETG.
The 60 cm drawer divider is deeper. In SpeakCAD you generate and preview for free, then download a file sized for the part you actually own.
No. SpeakCAD runs entirely in the browser: the chat, the 3D engine and the live viewer load in the tab. The only file you download is the finished STL or 3MF.
More organizers & storage
Gridfinity 2×1 bin for Leatherman Wave PlusA 2×1 Gridfinity bin (84 × 42 mm, 6U) with a 105 × 18 × 18 mm well that a Wave Plus drops into closed, plus a 12 mm slot for a bit kit.Framework 16 input-module trayA tray that stores two Framework 16 input modules (numpad, RGB macropad) in 130 × 70 mm wells.IKEA TROFAST label-holder clipA clip that hangs a 70 × 25 mm label on the front of a TROFAST bin so kids can find Lego without opening every drawer.Jewelry tray with ring bars and earring holesA dresser tray combining a ring bar section, a grid of 1.5 mm holes for stud earrings, and a shallow well for bracelets and necklaces.ESP32 dev board storage rack with 10 slotsA desk rack that stores ESP32 DevKit, ESP32-C3, ESP8266 NodeMCU and Arduino Nano boards upright with their USB ports facing up so the right one is easy to grab.Ninja Creami pint lid and cup holder rackA rack that stores the spare pint containers and lids for a Ninja Creami NC300 or NC500 so they are not stacked loose in the freezer door.