1
The prompt on this page opens in SpeakCAD already filled in — after sign-in too. The model renders in your browser. Preview is free.Desk & office
IKEA ALEX desk 80 mm round grommet
This is not a fixed STL. SpeakCAD generates the ikea alex desk 80 mm round grommet to your millimetres, you adjust it in the chat, then you download and print it.2
Change any millimetre in the chat: wall thickness, hole size, the thing it clips onto. Iterations stay in the tab until it matches what you own.Adjust
3Print
Download a watertight STL or 3MF for 2 credits, drop it in your slicer, and print it. Small fit fixes re-download free.Get it nowThe example prompt comes with you, even through sign-in. Preview is free; a download costs 2 credits.
What a ikea alex desk 80 mm round grommet is
An 80 mm round grommet for a drilled ALEX desk top so monitor and laptop cables drop into the drawer stack. The flange is 92 mm, the barrel is 18 mm, and a 16 mm slot opens. Print in PETG with 1.6 mm walls.
The LACK grommet is 60 mm and square. In SpeakCAD you set top thickness, preview the grommet in the browser at no cost, then download the STL.
Example prompt
Design an ALEX 80 mm round grommet, 92 mm flange, 18 mm barrel, 16 mm slot, 1.6 mm PETG.
People also search
alex grommet stlikea alex desk cable hole 3d printalex 80mm grommetalex desk cable cover 3d model
Questions people ask about a ikea alex desk 80 mm round grommet
An 80 mm round grommet for a drilled ALEX desk top so monitor and laptop cables drop into the drawer stack. The flange is 92 mm, the barrel is 18 mm, and a 16 mm slot opens. Print in PETG with 1.6 mm walls.
Click Get it now on this page: the example prompt is filled in for you after you sign in. The model renders in your browser — nothing to install — and previewing is free. Adjust any millimetre in the chat, then export a watertight STL or 3MF for 2 credits when you want to print.
Start from this working example and replace any number with what you measured: Design an ALEX 80 mm round grommet, 92 mm flange, 18 mm barrel, 16 mm slot, 1.6 mm PETG.
The LACK grommet is 60 mm and square. In SpeakCAD you generate and preview for free, then download a file sized for the part you actually own.
No. SpeakCAD runs entirely in the browser: the chat, the 3D engine and the live viewer load in the tab. The only file you download is the finished STL or 3MF.
More desk & office
iPad mini 7 bedside reading standA bedside stand that holds an iPad mini 7 (about 195 × 135 × 6.3 mm) at 40 degrees in portrait with a 14 mm USB-C slot and a 8 mm lip so a Folio case does no…SSL 2 MKII monitor-riser gap fillerA 20 mm filler that lets an SSL 2 MKII sit under a monitor riser with the knobs still reachable, 300 × 40 × 20 mm in two halves.MacBook Pro 14 M4 HDMI hub under-standA 22 mm shelf that sits under a 14-inch MacBook Pro M4 (about 15.5 mm closed, 312 mm wide) and parks a 6-port HDMI/SD hub so the left Thunderbolt ports stay…IKEA LACK side-table cable clipA clip that grabs a LACK side-table apron (about 50 mm) and parks a lamp cable so it does not show from the sofa.Garmin Venu 3 charger-clip dockA dock that holds a Venu 3 (about 45 mm) on its clip charger at 20 degrees.iPad Air 11 inch drawing stand with Apple Pencil trayA low-angle drawing stand for the iPad Air 11 (247.6 x 178.5 x 6.1 mm) that props the tablet at 20 degrees like a drafting board, with a groove along the fro…