1
Brackets & mounts
HX711 load cell mount plate
This is not a fixed STL. SpeakCAD generates the hx711 load cell mount plate to your millimetres, you adjust it in the chat, then you download and print it.Building the 3D preview…
2
Adjust
Click a part and change its numbers in the viewer, or ask the AI in the chat: wall thickness, hole size, the thing it clips onto. AI changes use plan credits.3Print
Download a watertight STL or 3MF with a Maker or Pro plan, drop it in your slicer, and print it. Small fit fixes re-download free.
Get it nowOpening the ready-made model is free. A plan covers AI changes and the download.
Example prompt
Create load cell plates 100×80×5 mm for an 80×12.7×12.7 mm bar cell, M5 and M4 holes, 5 mm flex spacers, 36×23 mm HX711 pocket.
What a hx711 load cell mount plate is
A pair of plates for a bar load cell (80 × 12.7 × 12.7 mm, 1–20 kg) read by an HX711 board (about 34 × 21 mm). The base plate is 100 × 80 × 5 mm with M5 holes at one end of the cell and a 5 mm spacer so it can flex, and the top plate uses the M4 holes at the other end. A 36 × 23 mm pocket holds the HX711. Print both plates flat in PETG with 5 walls.
The round 50 kg half-bridge sensors used in bathroom scales need a different mount. Open the ready-made model in SpeakCAD for free, adjust the plate size, then download the STL.
People also search
hx711 load cell mount stlload cell plate 3d printhx711 scale basebar load cell bracket 3d model
Questions people ask about a hx711 load cell mount plate
A pair of plates for a bar load cell (80 × 12.7 × 12.7 mm, 1–20 kg) read by an HX711 board (about 34 × 21 mm). The base plate is 100 × 80 × 5 mm with M5 holes at one end of the cell and a 5 mm spacer so it can flex, and the top plate uses the M4 holes at the other end. A 36 × 23 mm pocket holds the HX711. Print both plates flat in PETG with 5 walls.
Click Get it now on this page and sign in: you can open the ready-made model for free, and the example prompt is filled in if you want the AI to redesign it. The model renders in your browser, nothing to install. Change any millimetre in the viewer or the chat (AI changes use plan credits), then export a watertight STL or 3MF with a Maker or Pro plan when you want to print.
Start from this working example and replace any number with what you measured: Create load cell plates 100×80×5 mm for an 80×12.7×12.7 mm bar cell, M5 and M4 holes, 5 mm flex spacers, 36×23 mm HX711 pocket.
The round 50 kg half-bridge sensors used in bathroom scales need a different mount. In SpeakCAD you open the ready-made model for free, change it to your measurements, then download a file sized for the part you actually own.
No. SpeakCAD runs entirely in the browser: the chat, the 3D engine and the live viewer load in the tab. The only file you download is the finished STL or 3MF.
More brackets & mounts
Ibanez RG headstock guitar wall hanger angledA wall hanger shaped for the narrow, pointed reverse headstocks on Ibanez RG, S and JEM models, which slip out of the wide yokes made for a Fender Stratocast…Apple TV 4K 3rd gen HDMI shelfA 100 mm shelf that hides a 3rd-gen Apple TV 4K behind a TV with a 16 mm HDMI/power cutout and two 4.5 mm holes.Bose SoundLink Flex 2 bike mountA mount that holds a SoundLink Flex 2 (about 90 × 51 × 201 mm) on a 22.2 or 31.8 mm handlebar so a picnic ride has a speaker.Raspberry Pi 5 DIN rail mountA DIN rail clip for a Raspberry Pi 5 (85 × 56 mm) running Home Assistant in a fuse box or network cabinet.Google Pixel 9 Pro XL shower phone holder suctionA splash-tolerant cradle that holds a Google Pixel 9 Pro XL (162.8 x 76.6 x 8.5 mm) on shower tiles for podcasts and playlists.Starlink Gen 3 router wall mount bracketA bracket that stands the Starlink Gen 3 router upright on a wall or under a shelf so it does not take up a desk.