1
Replacement parts
Hotpoint gas hob knob
This is not a fixed STL. SpeakCAD generates the hotpoint gas hob knob to your millimetres, you adjust it in the chat, then you download and print it.Building the 3D preview…
2
Adjust
Click a part and change its numbers in the viewer, or ask the AI in the chat: wall thickness, hole size, the thing it clips onto. AI changes use plan credits.3Print
Download a watertight STL or 3MF with a Maker or Pro plan, drop it in your slicer, and print it. Small fit fixes re-download free.
Get it nowOpening the ready-made model is free. A plan covers AI changes and the download.
Example prompt
Model a Hotpoint gas hob knob, 35 mm diameter 20 mm deep, 6.1 mm D-bore with 4.7 mm flat, rear spring recess, flame pointer, ASA.
What a hotpoint gas hob knob is
A replacement knob for Hotpoint and Indesit gas hobs, about 35 mm across and 20 mm deep with a flame symbol pointer. It fits a 6 mm D-shaft (6.1 mm bore, 4.7 mm flat, 12 mm deep) and has a recess at the back to clear the push-to-ignite spring. Print in ASA, face down.
Electric hob knobs from the same brands have a smaller recess and no ignition travel. Open the ready-made knob free in SpeakCAD, change the size in the viewer or the chat, then download the STL.
People also search
hotpoint gas hob knobindesit hob knob replacementgas hob knob 3d printhotpoint cooker knob stl
Questions people ask about a hotpoint gas hob knob
A replacement knob for Hotpoint and Indesit gas hobs, about 35 mm across and 20 mm deep with a flame symbol pointer. It fits a 6 mm D-shaft (6.1 mm bore, 4.7 mm flat, 12 mm deep) and has a recess at the back to clear the push-to-ignite spring. Print in ASA, face down.
Click Get it now on this page and sign in: you can open the ready-made model for free, and the example prompt is filled in if you want the AI to redesign it. The model renders in your browser, nothing to install. Change any millimetre in the viewer or the chat (AI changes use plan credits), then export a watertight STL or 3MF with a Maker or Pro plan when you want to print.
Start from this working example and replace any number with what you measured: Model a Hotpoint gas hob knob, 35 mm diameter 20 mm deep, 6.1 mm D-bore with 4.7 mm flat, rear spring recess, flame pointer, ASA.
Electric hob knobs from the same brands have a smaller recess and no ignition travel. In SpeakCAD you open the ready-made model for free, change it to your measurements, then download a file sized for the part you actually own.
No. SpeakCAD runs entirely in the browser: the chat, the 3D engine and the live viewer load in the tab. The only file you download is the finished STL or 3MF.
More replacement parts
Voron 2.4 panel clip for 3 mm panelsA panel clip that holds the 3 mm side, rear and top panels of a Voron 2.4 against the 2020 frame, for replacing broken clips or re-panelling a build.iRobot Roomba front caster wheelA front caster wheel for iRobot Roomba 500, 600, 700 and 800 series robots, about 25 mm across and 12 mm wide, turning on the original 3 mm axle.Vacuum cleaner hose end cuffThe cuff where a vacuum hose meets the wand or floor head cracks from years of twisting, and once it splits the suction leaks away.Bambu Lab X1C purge wiper replacement bladeA replacement for the small nozzle wiper blade at the rear of the Bambu Lab X1 Carbon and P1S, which wears a groove after a few hundred hours and stops clean…Framework Laptop 16 expansion-bay coverA blank cover for a Framework 16 expansion bay when the GPU module is out, 150 × 20 × 8 mm with the official clips.Makita MAKPAC latch replacement clipA clip that replaces a cracked MAKPAC lid latch so the box still closes.