1
Organizers & storage
Hole saw rack, 19 to 76 mm
This is not a fixed STL. SpeakCAD generates the hole saw rack, 19 to 76 mm to your millimetres, you adjust it in the chat, then you download and print it.Building the 3D preview…
2
Adjust
Click a part and change its numbers in the viewer, or ask the AI in the chat: wall thickness, hole size, the thing it clips onto. AI changes use plan credits.3Print
Download a watertight STL or 3MF with a Maker or Pro plan, drop it in your slicer, and print it. Small fit fixes re-download free.
Get it nowOpening the ready-made model is free. A plan covers AI changes and the download.
Example prompt
Model a hole saw rack, 12 mm pegs 40 mm long with 3 mm lip spaced for 19 to 76 mm saws, arbor socket, two 4 mm screw holes.
What a hole saw rack, 19 to 76 mm is
A wall rack for bi-metal hole saws from 19 to 76 mm plus the arbor. Each saw hangs on a 12 mm peg through its centre hole, which clears both the 1/2-20 and 5/8-18 threads, on pegs 40 mm long with a 3 mm lip. Pegs are spaced from 30 to 85 mm to match the saw sizes, and a 12 mm hex socket holds the arbor. Print in PETG on its back.
Hole saws with a quick-change adapter plate may not slide onto 12 mm pegs. Open the rack in SpeakCAD for free, change the pegs in the viewer or the chat, then download the STL.
People also search
hole saw storagehole saw holder stlhole saw organizer 3d printhole saw wall rack
Questions people ask about a hole saw rack, 19 to 76 mm
A wall rack for bi-metal hole saws from 19 to 76 mm plus the arbor. Each saw hangs on a 12 mm peg through its centre hole, which clears both the 1/2-20 and 5/8-18 threads, on pegs 40 mm long with a 3 mm lip. Pegs are spaced from 30 to 85 mm to match the saw sizes, and a 12 mm hex socket holds the arbor. Print in PETG on its back.
Click Get it now on this page and sign in: you can open the ready-made model for free, and the example prompt is filled in if you want the AI to redesign it. The model renders in your browser, nothing to install. Change any millimetre in the viewer or the chat (AI changes use plan credits), then export a watertight STL or 3MF with a Maker or Pro plan when you want to print.
Start from this working example and replace any number with what you measured: Model a hole saw rack, 12 mm pegs 40 mm long with 3 mm lip spaced for 19 to 76 mm saws, arbor socket, two 4 mm screw holes.
Hole saws with a quick-change adapter plate may not slide onto 12 mm pegs. In SpeakCAD you open the ready-made model for free, change it to your measurements, then download a file sized for the part you actually own.
No. SpeakCAD runs entirely in the browser: the chat, the 3D engine and the live viewer load in the tab. The only file you download is the finished STL or 3MF.
More organizers & storage
Gridfinity bin for SDS-plus drill bitsA 3 × 2 Gridfinity bin (125.5 × 83.5 mm, 6 units tall) for SDS-plus masonry bits, whose shanks are 10 mm across.ESP32 dev board storage rack with 10 slotsA desk rack that stores ESP32 DevKit, ESP32-C3, ESP8266 NodeMCU and Arduino Nano boards upright with their USB ports facing up so the right one is easy to grab.DJI Mini 4 Pro ND filter case with six slotsA pocket case for the snap-on ND filters used by the DJI Mini 4 Pro and Mini 3 Pro, which measure roughly 25 x 24 mm and 8 mm deep including the clip and are…Mac Studio M4 top SD-card caddyA caddy that sits on a Mac Studio M4 and holds six SD cards plus two CFexpress in labelled slots, 120 × 80 × 16 mm, rubber-foot recesses so it does not slide.Sony WH-1000XM6 travel-case insertAn insert that keeps XM6 cups from grinding in the official case, with two 90 mm cup wells and a 20 mm cable trough.Insta360 X4 travel case insertAn insert that turns a small box into a travel case for an Insta360 X4 (46 × 123.6 × 37.6 mm) and its kit.