1
Desk & office
Headset hook for monitor arm pole
This is not a fixed STL. SpeakCAD generates the headset hook for monitor arm pole to your millimetres, you adjust it in the chat, then you download and print it.Building the 3D preview…
2
Adjust
Click a part and change its numbers in the viewer, or ask the AI in the chat: wall thickness, hole size, the thing it clips onto. AI changes use plan credits.3Print
Download a watertight STL or 3MF with a Maker or Pro plan, drop it in your slicer, and print it. Small fit fixes re-download free.
Get it nowOpening the ready-made model is free. A plan covers AI changes and the download.
Example prompt
Design a monitor arm pole headset hook, split collar for a 32 mm pole with M4 bolt, 2 mm TPU liner, 55 mm saddle 70 mm out, 4 mm walls.
What a headset hook for monitor arm pole is
A headset hook that clamps around a monitor arm pole (most are 30 to 35 mm; this one is set for 32 mm) with a split collar, an M4 bolt and nut, and a 55 mm wide rounded saddle that stands out 70 mm. A 2 mm TPU liner stops it sliding down. Print the collar on its side in PETG, 4 mm walls.
Flat single-arm mounts have no round pole, so a desk-edge hanger suits those better. Open the ready-made hook in SpeakCAD for free, set your pole diameter in the viewer or the chat, then download the STL.
People also search
monitor arm headset holder stlheadset hook monitor pole 3d printheadset hanger monitor armmonitor pole clamp hook
Questions people ask about a headset hook for monitor arm pole
A headset hook that clamps around a monitor arm pole (most are 30 to 35 mm; this one is set for 32 mm) with a split collar, an M4 bolt and nut, and a 55 mm wide rounded saddle that stands out 70 mm. A 2 mm TPU liner stops it sliding down. Print the collar on its side in PETG, 4 mm walls.
Click Get it now on this page and sign in: you can open the ready-made model for free, and the example prompt is filled in if you want the AI to redesign it. The model renders in your browser, nothing to install. Change any millimetre in the viewer or the chat (AI changes use plan credits), then export a watertight STL or 3MF with a Maker or Pro plan when you want to print.
Start from this working example and replace any number with what you measured: Design a monitor arm pole headset hook, split collar for a 32 mm pole with M4 bolt, 2 mm TPU liner, 55 mm saddle 70 mm out, 4 mm walls.
Flat single-arm mounts have no round pole, so a desk-edge hanger suits those better. In SpeakCAD you open the ready-made model for free, change it to your measurements, then download a file sized for the part you actually own.
No. SpeakCAD runs entirely in the browser: the chat, the 3D engine and the live viewer load in the tab. The only file you download is the finished STL or 3MF.
More desk & office
ZSA Moonlander tenting legs setA set of four screw-in tenting legs for a ZSA Moonlander that replace the stock 8 mm feet with 15, 25 and 40 mm options.Airspy HF+ Discovery desk standA stand that holds an HF+ Discovery at 20 degrees with SMA clearance and a 14 mm USB slot.Mac mini M4 rear cable combA comb that clips onto the rear edge of a Mac mini M4 and separates HDMI, two Thunderbolt cables and power so they do not unplug when you slide the mini.Logitech MX Ergo S trackball wedgeA 20 degree wedge under an MX Ergo S (about 138 × 100 × 50 mm) so the thumb ball sits higher than the stock 0–20 click.Rode Wireless PRO transmitter desk standA small angled stand that turns a Rode Wireless PRO transmitter (about 44 × 45 × 20 mm) into a desk microphone for calls and podcasts.Samsung Galaxy Watch charger puck holder for deskAn upright holder for the round Samsung Galaxy Watch wireless charging puck, so a Galaxy Watch 6 or 7 sits on its side charging instead of lying face down on…