1
Brackets & mounts
Google Nest Hub 2nd gen wall mount
This is not a fixed STL. SpeakCAD generates the google nest hub 2nd gen wall mount to your millimetres, you adjust it in the chat, then you download and print it.Building the 3D preview…
2
Adjust
Click a part and change its numbers in the viewer, or ask the AI in the chat: wall thickness, hole size, the thing it clips onto. AI changes use plan credits.3Print
Download a watertight STL or 3MF with a Maker or Pro plan, drop it in your slicer, and print it. Small fit fixes re-download free.
Get it nowOpening the ready-made model is free. A plan covers AI changes and the download.
Example prompt
Model a Nest Hub 2 wall mount, 102 mm wide saddle with 2 mm lip over the base, 12 mm cable slot, two 4 mm holes, 2.4 mm PETG.
What a google nest hub 2nd gen wall mount is
A wall mount for a Google Nest Hub 2nd gen (about 177 × 120 × 69 mm) that grips the fabric base, so the screen sits at eye level next to a light switch. The saddle is 102 mm wide with 1 mm clearance and a 2 mm lip over the base, a 12 mm slot passes the barrel cable, and the plate has two 4 mm holes. Print in PETG, 2.4 mm walls.
The Nest Hub Max is 250 mm wide and does not fit. Open the model in SpeakCAD at no cost, adjust any millimetre in the viewer or the chat, then download the STL.
People also search
nest hub wall mount stlgoogle nest hub 2nd gen mount 3d printnest hub bracketnest hub wall holder 3d model
Questions people ask about a google nest hub 2nd gen wall mount
A wall mount for a Google Nest Hub 2nd gen (about 177 × 120 × 69 mm) that grips the fabric base, so the screen sits at eye level next to a light switch. The saddle is 102 mm wide with 1 mm clearance and a 2 mm lip over the base, a 12 mm slot passes the barrel cable, and the plate has two 4 mm holes. Print in PETG, 2.4 mm walls.
Click Get it now on this page and sign in: you can open the ready-made model for free, and the example prompt is filled in if you want the AI to redesign it. The model renders in your browser, nothing to install. Change any millimetre in the viewer or the chat (AI changes use plan credits), then export a watertight STL or 3MF with a Maker or Pro plan when you want to print.
Start from this working example and replace any number with what you measured: Model a Nest Hub 2 wall mount, 102 mm wide saddle with 2 mm lip over the base, 12 mm cable slot, two 4 mm holes, 2.4 mm PETG.
The Nest Hub Max is 250 mm wide and does not fit. In SpeakCAD you open the ready-made model for free, change it to your measurements, then download a file sized for the part you actually own.
No. SpeakCAD runs entirely in the browser: the chat, the 3D engine and the live viewer load in the tab. The only file you download is the finished STL or 3MF.
More brackets & mounts
Sony WH-1000XM5 headphone wall hook with cable slotA slim wall hook designed around the narrow headband of the Sony WH-1000XM5, which is only about 25 mm wide at the top and slides off a chunky gaming-headset…Dyson V8 Absolute wand wall holsterA wall holster that parks a V8 Absolute wand and three click-in tools so you are not buying Dyson's official dock.Peloton Tread+ tablet riserA 30 mm riser that lifts a phone or small tablet on a Tread+ console so it sits above the official screen bezel.L-shaped shelf bracket, 150 mm reachA simple right-angle bracket for a light shelf up to about 150 mm deep, holding books, small speakers or plants in a hallway.MagSafe phone holder for shopping cart handleA hook that drops over a 25 to 30 mm shopping cart handle and presents a MagSafe magnet ring so an iPhone 15, 16 or any Qi2 phone hangs from its magnets whil…TP-Link Tapo C200 camera ceiling mount plateAn inverted mount plate for the TP-Link Tapo C200 pan and tilt camera, which is 86.6 x 85 x 117.7 mm and screws to a base with two holes about 50 mm apart.