1
Brackets & mounts
Garmin Edge aero extension mount for 22.2 mm bars
This is not a fixed STL. SpeakCAD generates the garmin edge aero extension mount for 22.2 mm bars to your millimetres, you adjust it in the chat, then you download and print it.Building the 3D preview…
2
Adjust
Click a part and change its numbers in the viewer, or ask the AI in the chat: wall thickness, hole size, the thing it clips onto. AI changes use plan credits.3Print
Download a watertight STL or 3MF with a Maker or Pro plan, drop it in your slicer, and print it. Small fit fixes re-download free.
Get it nowOpening the ready-made model is free. A plan covers AI changes and the download.
Example prompt
Create a Garmin aero bar bridge mount, two 22.2 mm clamps 80-130 mm apart on a slotted bridge, M4 bolts, quarter-turn tab 10 mm up, PETG.
What a garmin edge aero extension mount for 22.2 mm bars is
A bridge mount that clamps across both 22.2 mm aero extensions on a time-trial or gravel bike and holds a Garmin Edge between them at eye level. The two clamps sit 80 to 130 mm apart on a slotted bridge, each closes with one M4 bolt, and the quarter-turn tab sits in the middle 10 mm above the bridge. Print the bridge flat in PETG with 5 walls.
Some clip-on bars use 22.2 mm tubes only at the grip end, so clamp where the tube is round. Open the ready-made mount in SpeakCAD for free, change the spacing or any millimetre in the viewer or the chat, then download the STL.
People also search
garmin aero bar mountaero extension computer mount stltt bar garmin mount 3d printgarmin edge aerobar mount
Questions people ask about a garmin edge aero extension mount for 22.2 mm bars
A bridge mount that clamps across both 22.2 mm aero extensions on a time-trial or gravel bike and holds a Garmin Edge between them at eye level. The two clamps sit 80 to 130 mm apart on a slotted bridge, each closes with one M4 bolt, and the quarter-turn tab sits in the middle 10 mm above the bridge. Print the bridge flat in PETG with 5 walls.
Click Get it now on this page and sign in: you can open the ready-made model for free, and the example prompt is filled in if you want the AI to redesign it. The model renders in your browser, nothing to install. Change any millimetre in the viewer or the chat (AI changes use plan credits), then export a watertight STL or 3MF with a Maker or Pro plan when you want to print.
Start from this working example and replace any number with what you measured: Create a Garmin aero bar bridge mount, two 22.2 mm clamps 80-130 mm apart on a slotted bridge, M4 bolts, quarter-turn tab 10 mm up, PETG.
Some clip-on bars use 22.2 mm tubes only at the grip end, so clamp where the tube is round. In SpeakCAD you open the ready-made model for free, change it to your measurements, then download a file sized for the part you actually own.
No. SpeakCAD runs entirely in the browser: the chat, the 3D engine and the live viewer load in the tab. The only file you download is the finished STL or 3MF.
More brackets & mounts
DIN rail clip for mounting a small PCBA snap-on clip for standard 35 mm top-hat DIN rail with a flat platform for a small circuit board.Google Nest Mini wall hanger with hidden cableA hanger for the Google Nest Mini that uses the screw slot moulded into the back of the speaker.Sony WH-1000XM5 headphone wall hook with cable slotA slim wall hook designed around the narrow headband of the Sony WH-1000XM5, which is only about 25 mm wide at the top and slides off a chunky gaming-headset…Philips Hue Bloom under-shelf clipA clip that hides a Hue Bloom (about 120 mm diameter, 90 mm tall) under a 12–24 mm shelf so uplight hits the wall, not the table.GL.iNet Mango router wall mountA small wall mount for a GL.iNet Mango (GL-MT300N-V2, 58 × 58 × 25 mm) so it can sit behind a TV or next to a smart plug as a mini access point.Quad Lock compatible fork stem expander mountA fork stem mount for motorcycles with a hollow steering stem, with an expanding wedge that locks inside the hole and a top plate for a Quad Lock style phone…