1
Replacement parts
Eurorack 4HP blank panel
This is not a fixed STL. SpeakCAD generates the eurorack 4hp blank panel to your millimetres, you adjust it in the chat, then you download and print it.Building the 3D preview…
2
Adjust
Click a part and change its numbers in the viewer, or ask the AI in the chat: wall thickness, hole size, the thing it clips onto. AI changes use plan credits.3Print
Download a watertight STL or 3MF with a Maker or Pro plan, drop it in your slicer, and print it. Small fit fixes re-download free.
Get it nowOpening the ready-made model is free. A plan covers AI changes and the download.
Example prompt
Design a Eurorack 4HP blank panel, 128.5×20×2 mm, two 3.2 mm holes 7.5 mm from the left edge and 3 mm from top and bottom.
What a eurorack 4hp blank panel is
A blank panel that closes an empty 4HP gap in a Eurorack case. It is 128.5 × 20 × 2 mm (4HP is 20.32 mm, panels are made a little narrower), with two 3.2 mm mounting holes 7.5 mm from the left edge and 3 mm from the top and bottom, so they sit 122.5 mm apart. Print flat in PLA or PETG, face down on a textured sheet.
Intellijel 1U tile rows are only 39.65 mm tall, so this 3U panel will not fit them. Open the ready-made model in SpeakCAD for free, change the width to 2HP, 6HP or 8HP in the viewer or the chat, then download the STL.
People also search
eurorack blank panel stl4hp blank panel 3d printeurorack blind paneleurorack blank 3d model
Questions people ask about a eurorack 4hp blank panel
A blank panel that closes an empty 4HP gap in a Eurorack case. It is 128.5 × 20 × 2 mm (4HP is 20.32 mm, panels are made a little narrower), with two 3.2 mm mounting holes 7.5 mm from the left edge and 3 mm from the top and bottom, so they sit 122.5 mm apart. Print flat in PLA or PETG, face down on a textured sheet.
Click Get it now on this page and sign in: you can open the ready-made model for free, and the example prompt is filled in if you want the AI to redesign it. The model renders in your browser, nothing to install. Change any millimetre in the viewer or the chat (AI changes use plan credits), then export a watertight STL or 3MF with a Maker or Pro plan when you want to print.
Start from this working example and replace any number with what you measured: Design a Eurorack 4HP blank panel, 128.5×20×2 mm, two 3.2 mm holes 7.5 mm from the left edge and 3 mm from top and bottom.
Intellijel 1U tile rows are only 39.65 mm tall, so this 3U panel will not fit them. In SpeakCAD you open the ready-made model for free, change it to your measurements, then download a file sized for the part you actually own.
No. SpeakCAD runs entirely in the browser: the chat, the 3D engine and the live viewer load in the tab. The only file you download is the finished STL or 3MF.
More replacement parts
IKEA SMÅSTAD drawer-stop clipA clip that keeps a SMÅSTAD kids drawer from being pulled all the way out, 22 × 14 × 10 mm with a 3 mm lip that grabs the official runner.Creality K1 lid riserA riser frame that sits on top of a Creality K1 (355 × 355 × 480 mm) and holds the glass lid 25 mm higher, letting heat out when printing PLA so the hotend a…Dishwasher rack tine tip caps for 3 mm wirePush-on caps that cover the rusting ends of dishwasher rack tines on Bosch, Siemens, Whirlpool and most other racks, whose tines are 2.5 to 3.5 mm steel wire.KitchenAid mixer speed lever knobA replacement end knob for the speed control lever of KitchenAid stand mixers, the small plastic cap that cracks or falls off the metal lever.Extension cord reel crank handleCable reels are wound by a folding crank handle whose plastic knob and pivot break long before the cable does.Digital-caliper SR44 battery-door replacementA snap-in battery door for a 150 mm digital caliper that takes an SR44 / 357 cell, 16 mm across with a 0.6 mm lip.