Replacement parts

Sofa leg replacement foot, M8 stud

A missing sofa foot leaves the frame tilted and scratches the floor. Most flat-pack sofas use an M8 threaded stud, so a replacement foot is a 60 mm diameter, 50 mm tall tapered cylinder with a pocket for an M8 nut or heat-set insert, a felt pad recess on the bottom, and walls of at least 4 mm. Print it upright with 40 percent infill and 5 walls so it takes the load, in PETG for toughness. Rounded top edges keep it from marking upholstery.

SpeakCAD reproduces the height of your remaining legs so the sofa sits level, and matches the stud thread or bolt you have on hand. If your foot needs to be square or angled, describe it and iterate in the chat. The browser preview is free.

Get it nowGenerate and preview for free, in your browser. A download costs 2 credits.

Create a replacement sofa foot 50 mm tall tapering from 60 mm to 50 mm diameter, with a 13 mm hex pocket 7 mm deep for an M8 nut on top, an 8.5 mm through hole, a 2 mm felt recess on the base, and 3 mm fillets.

Change any number to match what you measured. The AI keeps the rest of the design consistent, and small follow-up edits after a download are free.

More replacement parts

Cabinet hinge mounting plate replacementConcealed cabinet hinges clip onto a small mounting plate screwed to the carcass, and when the plate cracks the door sags or falls off.Lawn mower height adjuster leverPush mowers set cutting height with a plastic lever that engages notched positions, and the pawl tooth wears until the wheel drops mid-mow.Ortlieb QL2.1 pannier hook insert replacementOrtlieb Back-Roller and Sport-Roller panniers use QL2.1 hooks with small plastic inserts that adapt the hook to rack tubing of 8, 10, 12 or 16 mm; the insert…Salomon Quicklace cord lock replacementSalomon Speedcross, Sense Ride and XA Pro trail shoes use a Quicklace system with a small two-hole cord lock that eventually cracks or loses its spring.Kärcher K4 trigger gun holder clip replacementA replacement for the clip on the back of a Kärcher K4 or K5 pressure washer that holds the trigger gun during storage and often snaps off in cold weather.Dishwasher rack wheel replacementWhen a lower rack wheel cracks the whole basket drags and jams, yet the original spare often costs more than a set of four printed ones.

Make your sofa leg replacement foot, m8 stud now

Nothing to install and no CAD skills needed. Describe it, watch it render, download the STL or 3MF and print it tonight.

Get it nowBrowse the library
Looking for a ready-made version? Check the marketplace, where makers sell finished, rated models for credits.