1
Enclosures & cases
ESP32-C6-DevKitC-1 case
This is not a fixed STL. SpeakCAD generates the esp32-c6-devkitc-1 case to your millimetres, you adjust it in the chat, then you download and print it.Building the 3D preview…
2
Adjust
Click a part and change its numbers in the viewer, or ask the AI in the chat: wall thickness, hole size, the thing it clips onto. AI changes use plan credits.3Print
Download a watertight STL or 3MF with a Maker or Pro plan, drop it in your slicer, and print it. Small fit fixes re-download free.
Get it nowOpening the ready-made model is free. A plan covers AI changes and the download.
Example prompt
Create an ESP32-C6-DevKitC-1 case, 53×26.5×14 mm cavity, two 9.5×3.8 mm USB-C slots, 2 mm button holes, 3 mm LED window, 1.6 mm walls.
What a esp32-c6-devkitc-1 case is
A snap-lid case for an Espressif ESP32-C6-DevKitC-1 (about 52 × 25.4 mm). The cavity is 53 × 26.5 × 14 mm with two 9.5 × 3.8 mm USB-C openings on the same end for the USB and UART ports, 2 mm holes over the BOOT and RESET buttons and a 3 mm RGB LED window. Walls are 1.6 mm. Print upside down in PLA or PETG.
The ESP32-C3 SuperMini is a much smaller board and the S3-DevKitC-1 is longer, so neither drops in. Open the ready-made model in SpeakCAD for free, change the cavity in the viewer or the chat, then download the STL.
People also search
esp32-c6 devkitc case stlesp32 c6 enclosure 3d printesp32-c6-devkitc-1 caseesp32 c6 box 3d model
Questions people ask about a esp32-c6-devkitc-1 case
A snap-lid case for an Espressif ESP32-C6-DevKitC-1 (about 52 × 25.4 mm). The cavity is 53 × 26.5 × 14 mm with two 9.5 × 3.8 mm USB-C openings on the same end for the USB and UART ports, 2 mm holes over the BOOT and RESET buttons and a 3 mm RGB LED window. Walls are 1.6 mm. Print upside down in PLA or PETG.
Click Get it now on this page and sign in: you can open the ready-made model for free, and the example prompt is filled in if you want the AI to redesign it. The model renders in your browser, nothing to install. Change any millimetre in the viewer or the chat (AI changes use plan credits), then export a watertight STL or 3MF with a Maker or Pro plan when you want to print.
Start from this working example and replace any number with what you measured: Create an ESP32-C6-DevKitC-1 case, 53×26.5×14 mm cavity, two 9.5×3.8 mm USB-C slots, 2 mm button holes, 3 mm LED window, 1.6 mm walls.
The ESP32-C3 SuperMini is a much smaller board and the S3-DevKitC-1 is longer, so neither drops in. In SpeakCAD you open the ready-made model for free, change it to your measurements, then download a file sized for the part you actually own.
No. SpeakCAD runs entirely in the browser: the chat, the 3D engine and the live viewer load in the tab. The only file you download is the finished STL or 3MF.
More enclosures & cases
4-channel relay module DIN rail caseA DIN rail case for a 4-channel 5 V relay module (about 75 × 55 mm).Wemos D1 mini and DHT22 wall caseA wall case for a Wemos D1 mini (34.2 × 25.6 mm) with a DHT22 sensor (25 × 15 × 7.7 mm body) mounted outside the main bay in a slotted pocket, away from the…Apple Watch Ultra charger puck travel case with cable wrapA pocket-size case for the Apple Watch magnetic fast charger used by the Ultra and Series 10, holding the puck (27.9 mm diameter, about 6 mm high) in a 28.4…LilyGO T-Display S3 case with screen bezelA desktop shell for the LilyGO T-Display S3, an ESP32-S3 board with a 1.9 inch 170 x 320 pixel display.Sonoff MINIR4M junction-box insertAn insert that holds a MINIR4M in a 80 × 80 mm junction box with strain-relief slots.Raspberry Pi 3B+ caseA two-part case for a Raspberry Pi 3 Model B+ (85 × 56 mm).