1
Desk & office
Elgato Stream Deck MK.2 45 degree stand
This is not a fixed STL. SpeakCAD generates the elgato stream deck mk.2 45 degree stand to your millimetres, you adjust it in the chat, then you download and print it.Building the 3D preview…
2
Adjust
Click a part and change its numbers in the viewer, or ask the AI in the chat: wall thickness, hole size, the thing it clips onto. AI changes use plan credits.3Print
Download a watertight STL or 3MF with a Maker or Pro plan, drop it in your slicer, and print it. Small fit fixes re-download free.
Get it nowOpening the ready-made model is free. A plan covers AI changes and the download.
Example prompt
Design a Stream Deck MK.2 stand, 45 degree tilt, 120 mm cradle 22 mm deep with 6 mm lip, 12 mm cable gap, 125×90 mm base with weight pocket.
What a elgato stream deck mk.2 45 degree stand is
A steeper desk stand for the Elgato Stream Deck MK.2 (about 118 × 84 × 21 mm without its magnetic stand) that sets it at 45 degrees with a 120 mm cradle, a 6 mm lip and a 12 mm gap at the back for the USB-C cable. The 125 × 90 mm base has a weight pocket so it does not slide when you press a key. Print on its side in PLA, 3 mm walls.
The Stream Deck Mini is only 84 × 60 mm and the XL is much wider. Open the ready-made stand in SpeakCAD for free, change the angle in the viewer or the chat, then download the STL.
People also search
stream deck mk2 stand stlstream deck stand 3d printstream deck angled standstream deck mk.2 holder
Questions people ask about a elgato stream deck mk.2 45 degree stand
A steeper desk stand for the Elgato Stream Deck MK.2 (about 118 × 84 × 21 mm without its magnetic stand) that sets it at 45 degrees with a 120 mm cradle, a 6 mm lip and a 12 mm gap at the back for the USB-C cable. The 125 × 90 mm base has a weight pocket so it does not slide when you press a key. Print on its side in PLA, 3 mm walls.
Click Get it now on this page and sign in: you can open the ready-made model for free, and the example prompt is filled in if you want the AI to redesign it. The model renders in your browser, nothing to install. Change any millimetre in the viewer or the chat (AI changes use plan credits), then export a watertight STL or 3MF with a Maker or Pro plan when you want to print.
Start from this working example and replace any number with what you measured: Design a Stream Deck MK.2 stand, 45 degree tilt, 120 mm cradle 22 mm deep with 6 mm lip, 12 mm cable gap, 125×90 mm base with weight pocket.
The Stream Deck Mini is only 84 × 60 mm and the XL is much wider. In SpeakCAD you open the ready-made model for free, change it to your measurements, then download a file sized for the part you actually own.
No. SpeakCAD runs entirely in the browser: the chat, the 3D engine and the live viewer load in the tab. The only file you download is the finished STL or 3MF.
More desk & office
MagSafe, Apple Watch and AirPods trio standA nightstand stand that holds a MagSafe puck at 60 degrees, an Apple Watch Ultra / Series puck in a 28 mm bore, and an AirPods 4 case in a 52 mm well.IKEA LACK side-table cable clipA clip that grabs a LACK side-table apron (about 50 mm) and parks a lamp cable so it does not show from the sofa.Steam Deck 2 JSAUX dock cable combA comb that sits behind a JSAUX-style Deck 2 dock and separates HDMI, USB-C and power so they do not unplug when you grab the Deck.Adhesive desk cable clip setA set of low-profile clips that stick to the edge of a desk and hold charging cables.Focusrite Scarlett 2i2 4th Gen angled desk standA desk stand that tilts a Focusrite Scarlett 2i2 4th Gen or Scarlett Solo (the 2i2 is 180 x 47.5 x 117 mm) back 25 degrees so the gain halos and Air button f…Polar Vantage V3 charger cradleA cradle that holds a Vantage V3 on its four-pogo cable at 15 degrees, 48 mm nest.