1
Kitchen & home
Ecobee Smart Sensor angled stand
This is not a fixed STL. SpeakCAD generates the ecobee smart sensor angled stand to your millimetres, you adjust it in the chat, then you download and print it.Building the 3D preview…
2
Adjust
Click a part and change its numbers in the viewer, or ask the AI in the chat: wall thickness, hole size, the thing it clips onto. AI changes use plan credits.3Print
Download a watertight STL or 3MF with a Maker or Pro plan, drop it in your slicer, and print it. Small fit fixes re-download free.
Get it nowOpening the ready-made model is free. A plan covers AI changes and the download.
Example prompt
Model an Ecobee Smart Sensor stand, 41×41×15 mm pocket at 20 degrees, 60×50 mm base with 20 mm weight pocket, open back, PLA.
What a ecobee smart sensor angled stand is
A weighted stand for an Ecobee Smart Sensor (about 40 × 40 × 15 mm) that tilts it 20 degrees on a shelf so its occupancy sensor faces the room. The pocket is 41 × 41 × 15 mm with a 0.4 mm clearance, the base is 60 × 50 mm with a 20 mm coin pocket for weight, and the back is open so the battery door stays reachable. Print in PLA.
The Ecobee thermostat shim is a different part. Open the ready-made stand in SpeakCAD for free, set the angle in the chat or the viewer, then download the STL.
People also search
ecobee smart sensor stand stlecobee sensor holder 3d printecobee room sensor standecobee sensor tabletop 3d model
Questions people ask about a ecobee smart sensor angled stand
A weighted stand for an Ecobee Smart Sensor (about 40 × 40 × 15 mm) that tilts it 20 degrees on a shelf so its occupancy sensor faces the room. The pocket is 41 × 41 × 15 mm with a 0.4 mm clearance, the base is 60 × 50 mm with a 20 mm coin pocket for weight, and the back is open so the battery door stays reachable. Print in PLA.
Click Get it now on this page and sign in: you can open the ready-made model for free, and the example prompt is filled in if you want the AI to redesign it. The model renders in your browser, nothing to install. Change any millimetre in the viewer or the chat (AI changes use plan credits), then export a watertight STL or 3MF with a Maker or Pro plan when you want to print.
Start from this working example and replace any number with what you measured: Model an Ecobee Smart Sensor stand, 41×41×15 mm pocket at 20 degrees, 60×50 mm base with 20 mm weight pocket, open back, PLA.
The Ecobee thermostat shim is a different part. In SpeakCAD you open the ready-made model for free, change it to your measurements, then download a file sized for the part you actually own.
No. SpeakCAD runs entirely in the browser: the chat, the 3D engine and the live viewer load in the tab. The only file you download is the finished STL or 3MF.
More kitchen & home
Nespresso Vertuo Plus capsule bin for 30 podsA bin that sits beside a Vertuo Plus and holds 30 used capsules in a 160 × 120 × 140 mm well with a 4 mm drip lip so coffee does not hit the counter.Xiaomi LYWSD03MMC thermometer wall frameA wall frame for the Xiaomi Mi Temperature and Humidity Monitor 2 (LYWSD03MMC, 43 × 43 × 12.5 mm), popular with ATC firmware and Home Assistant BLE.Razor stand with drip trayA small stand that holds a cartridge razor head-up so the blades dry between shaves and last longer.DeLonghi Dedica 51 mm dosing funnel ring for the portafilterA dosing funnel that sits on the 51 mm basket of a DeLonghi Dedica EC685 or EC885 and stops ground coffee from spilling over the rim while you fill and distr…Breville Barista Pro 54 mm dosing funnelA 54 mm dosing funnel that sits on a Barista Pro portafilter with a 55 mm ID and a 12 mm wall so a WDT tool does not flick grounds.Dreame L20 Ultra mop drying rackA rack that holds two L20 Ultra mop pads upright so they dry beside the dock, 180 × 40 × 80 mm with 6 mm slots.