1
The prompt on this page opens in SpeakCAD already filled in — after sign-in too. The model renders in your browser. Preview is free.Brackets & mounts
Dyson V8 Fluffy soft-roller wall hook
This is not a fixed STL. SpeakCAD generates the dyson v8 fluffy soft-roller wall hook to your millimetres, you adjust it in the chat, then you download and print it.2
Change any millimetre in the chat: wall thickness, hole size, the thing it clips onto. Iterations stay in the tab until it matches what you own.Adjust
3Print
Download a watertight STL or 3MF for 2 credits, drop it in your slicer, and print it. Small fit fixes re-download free.Get it nowThe example prompt comes with you, even through sign-in. Preview is free; a download costs 2 credits.
What a dyson v8 fluffy soft-roller wall hook is
A hook that hangs the V8 Fluffy soft roller (about 230 mm wide) next to the V8 holster so the roller is not stored on its bristles. The saddle is 36 mm with two 4.5 mm holes on 70 mm centres. Print in PETG with 2 mm walls.
The V8 wand holster does not take the head. Describe Fluffy vs Motorbar in SpeakCAD, preview the hook in the browser at no cost, then download the STL.
Example prompt
Design a V8 Fluffy wall hook, 36 mm saddle, two 4.5 mm holes on 70 mm centres, 2 mm PETG.
People also search
dyson v8 fluffy hook stlv8 soft roller holder 3d printdyson v8 fluffy wall mountv8 roller hook 3d model
Questions people ask about a dyson v8 fluffy soft-roller wall hook
A hook that hangs the V8 Fluffy soft roller (about 230 mm wide) next to the V8 holster so the roller is not stored on its bristles. The saddle is 36 mm with two 4.5 mm holes on 70 mm centres. Print in PETG with 2 mm walls.
Click Get it now on this page: the example prompt is filled in for you after you sign in. The model renders in your browser — nothing to install — and previewing is free. Adjust any millimetre in the chat, then export a watertight STL or 3MF for 2 credits when you want to print.
Start from this working example and replace any number with what you measured: Design a V8 Fluffy wall hook, 36 mm saddle, two 4.5 mm holes on 70 mm centres, 2 mm PETG.
The V8 wand holster does not take the head. In SpeakCAD you generate and preview for free, then download a file sized for the part you actually own.
No. SpeakCAD runs entirely in the browser: the chat, the 3D engine and the live viewer load in the tab. The only file you download is the finished STL or 3MF.
More brackets & mounts
Bracket to fit a 2.5 inch SSD in a 3.5 inch bayA rail-style bracket that positions a 2.5 inch SSD inside a 3.5 inch drive bay so the case's standard screws or tool-less clips engage.Hidden AirTag mount under bike saddle railsA small clamshell that bolts between the two 7 mm rails under a bicycle saddle and hides an Apple AirTag (31.9 mm diameter, 8 mm thick) where a thief will no…Starlink Gen 3 router wall mount bracketA bracket that stands the Starlink Gen 3 router upright on a wall or under a shelf so it does not take up a desk.Hatch Rest sound machine wall shelf with cable channelA small shelf that mounts a Hatch Rest or Rest+ sound machine on the nursery wall out of reach of a toddler while keeping the top touch ring accessible.Dyson Gen5detect crevice-tool clipA clip that holds the Gen5detect crevice tool on the wand so it does not live in the other room.Philips Hue Bloom under-shelf clipA clip that hides a Hue Bloom (about 120 mm diameter, 90 mm tall) under a 12–24 mm shelf so uplight hits the wall, not the table.