1
Brackets & mounts
Dyson V11 wall dock skirting spacer
This is not a fixed STL. SpeakCAD generates the dyson v11 wall dock skirting spacer to your millimetres, you adjust it in the chat, then you download and print it.Building the 3D preview…
2
Adjust
Click a part and change its numbers in the viewer, or ask the AI in the chat: wall thickness, hole size, the thing it clips onto. AI changes use plan credits.3Print
Download a watertight STL or 3MF with a Maker or Pro plan, drop it in your slicer, and print it. Small fit fixes re-download free.
Get it nowOpening the ready-made model is free. A plan covers AI changes and the download.
Example prompt
Create a Dyson V11 wall dock spacer, 30 mm thick, dock back plate footprint with two screw holes, charger cable channel, PETG.
What a dyson v11 wall dock skirting spacer is
A spacer that sits behind a Dyson V11 or V15 wall dock so the machine clears a skirting board instead of hitting it. It is 30 mm thick, matches the dock back plate footprint with its two screw holes, and has a channel for the charger cable. Print in PETG, flat, with 4 walls.
The V8 dock has a different back plate, so the holes will not line up. The ready-made spacer opens free in SpeakCAD; change the thickness in the viewer or the chat, then download the STL.
People also search
dyson v11 wall dock spacerdyson dock skirting board spacerdyson v15 dock spacer 3d printdyson wall mount spacer stl
Questions people ask about a dyson v11 wall dock skirting spacer
A spacer that sits behind a Dyson V11 or V15 wall dock so the machine clears a skirting board instead of hitting it. It is 30 mm thick, matches the dock back plate footprint with its two screw holes, and has a channel for the charger cable. Print in PETG, flat, with 4 walls.
Click Get it now on this page and sign in: you can open the ready-made model for free, and the example prompt is filled in if you want the AI to redesign it. The model renders in your browser, nothing to install. Change any millimetre in the viewer or the chat (AI changes use plan credits), then export a watertight STL or 3MF with a Maker or Pro plan when you want to print.
Start from this working example and replace any number with what you measured: Create a Dyson V11 wall dock spacer, 30 mm thick, dock back plate footprint with two screw holes, charger cable channel, PETG.
The V8 dock has a different back plate, so the holes will not line up. In SpeakCAD you open the ready-made model for free, change it to your measurements, then download a file sized for the part you actually own.
No. SpeakCAD runs entirely in the browser: the chat, the 3D engine and the live viewer load in the tab. The only file you download is the finished STL or 3MF.
More brackets & mounts
Garmin Edge 130 Plus stem top cap mountA stem top cap with a built-in Garmin quarter-turn tab that holds a small Edge 130 Plus right above the steerer.Wall mount plate for a Raspberry Pi 4A flat carrier plate that screws to a wall or cabinet and holds a bare Raspberry Pi 4 on standoffs, keeping all ports reachable and the board open for cooling.Sonos Era 100 wall bracket with cable channelA wall bracket for the Sonos Era 100, a 182 mm tall, 120 mm wide and 130 mm deep speaker weighing about 2 kg with a 1/4 inch-20 threaded insert on the rear.Ibanez RG headstock guitar wall hanger angledA wall hanger shaped for the narrow, pointed reverse headstocks on Ibanez RG, S and JEM models, which slip out of the wide yokes made for a Fender Stratocast…Philips Hue Play bar desk-edge clampA clamp that hangs a Hue Play bar (about 254 × 44 × 36 mm) from a 15–32 mm desk edge so bias lighting sits behind a monitor.Ubiquiti EdgeRouter X wall mountA wall bracket for an EdgeRouter X (about 110 × 75 × 22 mm) that holds it vertically with the five ports facing down.