1
The prompt on this page opens in SpeakCAD already filled in — after sign-in too. The model renders in your browser. Preview is free.Desk & office
Dyson Corrale HS07 charger dock
This is not a fixed STL. SpeakCAD generates the dyson corrale hs07 charger dock to your millimetres, you adjust it in the chat, then you download and print it.2
Change any millimetre in the chat: wall thickness, hole size, the thing it clips onto. Iterations stay in the tab until it matches what you own.Adjust
3Print
Download a watertight STL or 3MF for 2 credits, drop it in your slicer, and print it. Small fit fixes re-download free.Get it nowThe example prompt comes with you, even through sign-in. Preview is free; a download costs 2 credits.
What a dyson corrale hs07 charger dock is
A dock that holds a Dyson Corrale HS07 (about 45 × 32 mm closed) on its magnetic charger so the plates do not rest on the glass. The well is 48 × 35 mm at 70 degrees with a 20 mm charger slot at the back. The base is 100 × 70 mm. Print in PETG with 2 mm walls.
A generic straightener stand scorches. In SpeakCAD you confirm HS07 vs HS03, preview the dock in the browser at no cost, then download the STL.
Example prompt
Design a Corrale HS07 charger dock 100×70×60 mm, 48×35 mm well at 70 degrees, 20 mm charger slot, 2 mm PETG.
People also search
dyson corrale dock stlcorrale hs07 stand 3d printdyson corrale charger holdercorrale straightener dock 3d model
Questions people ask about a dyson corrale hs07 charger dock
A dock that holds a Dyson Corrale HS07 (about 45 × 32 mm closed) on its magnetic charger so the plates do not rest on the glass. The well is 48 × 35 mm at 70 degrees with a 20 mm charger slot at the back. The base is 100 × 70 mm. Print in PETG with 2 mm walls.
Click Get it now on this page: the example prompt is filled in for you after you sign in. The model renders in your browser — nothing to install — and previewing is free. Adjust any millimetre in the chat, then export a watertight STL or 3MF for 2 credits when you want to print.
Start from this working example and replace any number with what you measured: Design a Corrale HS07 charger dock 100×70×60 mm, 48×35 mm well at 70 degrees, 20 mm charger slot, 2 mm PETG.
A generic straightener stand scorches. In SpeakCAD you generate and preview for free, then download a file sized for the part you actually own.
No. SpeakCAD runs entirely in the browser: the chat, the 3D engine and the live viewer load in the tab. The only file you download is the finished STL or 3MF.
More desk & office
Mac Studio M4 Thunderbolt cable combA comb that sits on the rear I/O of a Mac Studio M4 and separates four Thunderbolt 5 cables plus HDMI so they unplug one at a time.Sony WF-1000XM5 desk charging wellA well that parks an XM5 charging case (about 65 × 45 × 25 mm) on its USB-C side so the lid faces up.Desk tray for paper clips and binder clipsA shallow sorting tray that separates paper clips, binder clips of two sizes and push pins into distinct wells.iPhone 17 Air MagSafe wallet standA slim nightstand stand that an iPhone 17 Air (about 147 × 72 × 5.6 mm) snaps onto at 60 degrees for StandBy, with a 4 mm pocket behind the MagSafe disc for…Suunto Vertical charger-cable standA stand that holds a Suunto Vertical on its pogo cable at 25 degrees, 50 mm nest.Mac Studio M4 under-desk trayA ventilated tray that clamps a Mac Studio M4 (about 197 × 197 × 95 mm) under a 15–36 mm desk so the 120 mm rear exhaust stays open.