Tools & jigs

Drill template for a 70 mm wheel bolt circle

A drilling template for the 6-bolt, 70 mm bolt circle shared by most sim racing wheel rims, hubs and quick releases. Clamp the 90 mm disc on a button plate, an adapter or a DIY hub, drill through the six 4.2 mm guide holes, then tap M5 or open the holes to 5.5 mm. A 3 mm centre hole and four notches line it up with scribed centre lines. It is a 6 mm disc that prints flat without supports; the guide holes last longer in PETG. Describe your measurements and SpeakCAD builds it with AI (credits), then download STL, 3MF or sliced G-code.
No ready-made model yet: building it uses credits (4 credits for the part on a plan, its first 3 small changes free; Maker: 50 credits a month for $7.99, cancel anytime).Updated

No ready-made model for this part yet

Sign in and SpeakCAD builds it from the prompt below (4 credits for the part on a plan, its first 3 small changes free; Maker: 50 credits a month for $7.99, cancel anytime). Want to try the editor first? The live demo is free, no account.
1

Describe

Sign in: the example prompt below is filled in. SpeakCAD builds the part from it with AI, 4 credits for the part on a plan, its first 3 small changes free (Maker: 50 credits a month for $7.99, cancel anytime). Replace any number with what you measured first.
2

Adjust

Change its numbers in the viewer for free, or ask the AI for a change in the chat (2 credits for a small change, 1 for a quick edit, 3 for a redesign; the first 3 small changes are free on a plan).
3

Print

Download a watertight STL or 3MF, included in every plan (4 credits without one), or G-code sliced for your printer at the same price.

Example prompt

Create a drilling template for the 6-bolt, 70 mm bolt circle used by sim racing wheel rims and hubs. Disc 90 mm in diameter and 6 mm thick. Six 4.2 mm guide holes evenly spaced on a 70 mm circle (4.2 mm is the tap drill for M5). A 3 mm centre hole for a pilot pin, and four V notches 2 mm deep on the rim at 0, 90, 180 and 270 degrees to line up with scribed centre lines. Engrave 70 on the top face, 6 mm high and 0.6 mm deep. Print flat, no supports.

Build it with AI opens the app with this prompt already typed. Replace any number with what you measured before sending it; the rest of the design stays consistent.

Fit notes

Not every part uses 70 mm. Many quick releases and smaller hubs use a 50.8 mm circle with three or six bolts, and some classic rims use 74 mm. A template printed from a fixed file covers one of them. In SpeakCAD you set the circle, the number of holes and the drill size, or put two circles on one disc.

Also searched as: 70mm pcd drill template stl, steering wheel bolt pattern jig 3d print, 6x70 drilling template, sim wheel hub drill guide.

Questions people ask about a drill template for a 70 mm wheel bolt circle

A drilling template for the 6-bolt, 70 mm bolt circle shared by most sim racing wheel rims, hubs and quick releases. Clamp the 90 mm disc on a button plate, an adapter or a DIY hub, drill through the six 4.2 mm guide holes, then tap M5 or open the holes to 5.5 mm. A 3 mm centre hole and four notches line it up with scribed centre lines. It is a 6 mm disc that prints flat without supports; the guide holes last longer in PETG.

There is no ready-made model for this part yet. Click Build it with AI and sign in: the example prompt on this page is filled in, and SpeakCAD builds the part from it in your browser (4 credits for the part on a plan, its first 3 small changes free). Change any number in the viewer for free, then download a watertight STL or 3MF, included in every plan (4 credits without one), or G-code sliced for your printer at the same price. Start with Maker: 50 credits a month for $7.99, cancel anytime.

SpeakCAD builds it to your measurements from the example prompt on this page: the part uses 4 credits on a plan, its first 3 small changes free (3 without a plan), and a small change after them 2, then the STL or 3MF download is included in every plan (4 credits without one), or G-code sliced for your printer at the same price. Start with Maker: 50 credits a month for $7.99, cancel anytime. To try the editor before paying, the live demo is free, no account.

A shared STL is modelled for someone else's measurements. SpeakCAD builds this part to the millimetres you give it (AI requests use credits), so the file you download is sized for the part you actually own.

Yes. SpeakCAD slices the part on its servers with OrcaSlicer and your printer's official profile (380+ printers, including Bambu Lab, Prusa, Creality and Elegoo), and you download the G-code (a sliced .gcode.3mf for Bambu Lab printers). G-code sliced for your printer costs the same as the STL: included in every plan, free for a part you shaped by hand, 4 credits without a plan for a part with AI work in it. Pick your printer on the printers page to see its profile.

No. SpeakCAD runs in the browser on your phone or computer: the chat, the 3D engine and the live viewer load in the tab. The only file you download is the finished STL, 3MF or sliced G-code.

Build, adjust and print your drill template for a 70 mm wheel bolt circle

Nothing to install. The prompt is waiting in the app after you sign in: SpeakCAD builds the part with AI (credits), no CAD skills needed, you check the fit, then download the STL, 3MF or sliced G-code.

Looking for a finished design by a maker? Browse the tools & jigs on the marketplace, where makers share their models, most of them free.