1
The prompt on this page opens in SpeakCAD already filled in — after sign-in too. The model renders in your browser. Preview is free.Kitchen & home
Dreame X40 Ultra mop drying rack
This is not a fixed STL. SpeakCAD generates the dreame x40 ultra mop drying rack to your millimetres, you adjust it in the chat, then you download and print it.2
Change any millimetre in the chat: wall thickness, hole size, the thing it clips onto. Iterations stay in the tab until it matches what you own.Adjust
3Print
Download a watertight STL or 3MF for 2 credits, drop it in your slicer, and print it. Small fit fixes re-download free.Get it nowThe example prompt comes with you, even through sign-in. Preview is free; a download costs 2 credits.
What a dreame x40 ultra mop drying rack is
A rack that stands two X40 Ultra mop pads (about 160 × 75 mm) on edge after you rinse them, 170 × 42 × 52 mm with two 8 mm slots. Print in PETG with 2 mm walls.
The L20 Ultra mop rack is a different pad. In SpeakCAD you confirm X40 vs L20, preview the rack in the browser at no cost, then download the STL.
Example prompt
Design a Dreame X40 Ultra mop rack 170×42×52 mm with two 8 mm slots, 2 mm PETG.
People also search
dreame x40 mop rack stlx40 ultra mop dryer 3d printdreame x40 mop holderx40 ultra pad rack 3d model
Questions people ask about a dreame x40 ultra mop drying rack
A rack that stands two X40 Ultra mop pads (about 160 × 75 mm) on edge after you rinse them, 170 × 42 × 52 mm with two 8 mm slots. Print in PETG with 2 mm walls.
Click Get it now on this page: the example prompt is filled in for you after you sign in. The model renders in your browser — nothing to install — and previewing is free. Adjust any millimetre in the chat, then export a watertight STL or 3MF for 2 credits when you want to print.
Start from this working example and replace any number with what you measured: Design a Dreame X40 Ultra mop rack 170×42×52 mm with two 8 mm slots, 2 mm PETG.
The L20 Ultra mop rack is a different pad. In SpeakCAD you generate and preview for free, then download a file sized for the part you actually own.
No. SpeakCAD runs entirely in the browser: the chat, the 3D engine and the live viewer load in the tab. The only file you download is the finished STL or 3MF.
More kitchen & home
Vitamix Explorian E310 blade-cover standA stand that holds an E310 container (about 180 mm across the blade) upside down with a 40 mm blade clearance so the jar dries without dulling the blade on t…Snap-close chip bag sealing clipsA set of bag clips that seal crisps, cereal and frozen vegetables shut.Custom shape cookie cutter with stampA cookie cutter made from any outline you describe, with a sharp cutting edge on one side and a wide pressing flange on the other so dough releases cleanly.Vitamix tamper holder clip for the container baseA clip that holds the Vitamix tamper upright next to the motor base so it is never rolling around a drawer or lying wet on the counter.Fellow Stagg EKG drip-tray gridA 90 × 70 × 6 mm grid that sits on a Stagg EKG base and lets drips fall through 4 mm slots instead of staining the metal.Dyson Airwrap i.d. barrel wall rackA wall rack that parks the four Airwrap i.d.