1
Enclosures & cases
DFPlayer Mini speaker box
This is not a fixed STL. SpeakCAD generates the dfplayer mini speaker box to your millimetres, you adjust it in the chat, then you download and print it.Building the 3D preview…
2
Adjust
Click a part and change its numbers in the viewer, or ask the AI in the chat: wall thickness, hole size, the thing it clips onto. AI changes use plan credits.3Print
Download a watertight STL or 3MF with a Maker or Pro plan, drop it in your slicer, and print it. Small fit fixes re-download free.
Get it nowOpening the ready-made model is free. A plan covers AI changes and the download.
Example prompt
Design a DFPlayer Mini speaker box 60×60×35 mm, 40 mm speaker grille, 12×3 mm microSD slot, USB opening, two 7 mm button holes, 2 mm walls.
What a dfplayer mini speaker box is
A small speaker box for a DFPlayer Mini (20 × 20 mm) with a 40 mm 3 W speaker and a Wemos D1 mini or Nano. The box is 60 × 60 × 35 mm with a 40 mm speaker grille, a 12 × 3 mm microSD slot, a 9.5 × 3.8 mm USB opening and two 7 mm holes for 6 mm buttons. Walls are 2 mm. Print the grille face-down in PLA.
A 28 mm speaker is quieter and sits loose in the 40 mm ring. Open the ready-made model in SpeakCAD for free, change the speaker size in the viewer or the chat, then download the STL.
People also search
dfplayer mini case stldfplayer speaker box 3d printdfplayer mini enclosuremp3 module speaker case 3d model
Questions people ask about a dfplayer mini speaker box
A small speaker box for a DFPlayer Mini (20 × 20 mm) with a 40 mm 3 W speaker and a Wemos D1 mini or Nano. The box is 60 × 60 × 35 mm with a 40 mm speaker grille, a 12 × 3 mm microSD slot, a 9.5 × 3.8 mm USB opening and two 7 mm holes for 6 mm buttons. Walls are 2 mm. Print the grille face-down in PLA.
Click Get it now on this page and sign in: you can open the ready-made model for free, and the example prompt is filled in if you want the AI to redesign it. The model renders in your browser, nothing to install. Change any millimetre in the viewer or the chat (AI changes use plan credits), then export a watertight STL or 3MF with a Maker or Pro plan when you want to print.
Start from this working example and replace any number with what you measured: Design a DFPlayer Mini speaker box 60×60×35 mm, 40 mm speaker grille, 12×3 mm microSD slot, USB opening, two 7 mm button holes, 2 mm walls.
A 28 mm speaker is quieter and sits loose in the 40 mm ring. In SpeakCAD you open the ready-made model for free, change it to your measurements, then download a file sized for the part you actually own.
No. SpeakCAD runs entirely in the browser: the chat, the 3D engine and the live viewer load in the tab. The only file you download is the finished STL or 3MF.
More enclosures & cases
Sonoff MINIR4M junction-box insertAn insert that holds a MINIR4M in a 80 × 80 mm junction box with strain-relief slots.Raspberry Pi 5 PoE+ HAT caseA case for a Raspberry Pi 5 (85 × 56 mm) powered by a PoE+ HAT on top.XL4015 buck converter caseA vented case for the XL4015 5 A buck converter (about 54 × 23 × 18 mm with its heatsink).VEML7700 light sensor window caseA window-mounted case for a VEML7700 lux breakout (about 25 × 18 mm) that faces the sensor at the glass through a 6 mm aperture, for daylight automations in…Project box with sliding lid, 100 x 60 x 30 mmA general purpose electronics box with a lid that slides in along dovetail grooves, avoiding screws and giving quick access to whatever is inside.Adafruit Feather case for a FeatherWing stackAn enclosure built around the Adafruit Feather form factor: 50.8 x 22.8 mm boards with 2.5 mm mounting holes on a 45.72 x 17.78 mm pattern.