1
The prompt on this page opens in SpeakCAD already filled in — after sign-in too. The model renders in your browser. Preview is free.Brackets & mounts
DeWalt FLEXVOLT battery wall rack
This is not a fixed STL. SpeakCAD generates the dewalt flexvolt battery wall rack to your millimetres, you adjust it in the chat, then you download and print it.2
Change any millimetre in the chat: wall thickness, hole size, the thing it clips onto. Iterations stay in the tab until it matches what you own.Adjust
3Print
Download a watertight STL or 3MF for 2 credits, drop it in your slicer, and print it. Small fit fixes re-download free.Get it nowThe example prompt comes with you, even through sign-in. Preview is free; a download costs 2 credits.
What a dewalt flexvolt battery wall rack is
A rack that hangs four FLEXVOLT 60V/20V batteries (about 110 × 80 mm) on a stud so they are not mixed with 20V MAX packs. Each nest is 112 × 82 mm. The rail is 360 × 70 × 22 mm. Print in PETG with 2.4 mm walls.
The 20V MAX wall rack is too small. In SpeakCAD you set four vs six, preview the rack in the browser at no cost, then download the STL.
Example prompt
Design a FLEXVOLT wall rack 360×70×22 mm, four 112×82 mm nests, 2.4 mm PETG.
People also search
flexvolt battery rack stldewalt 60v wall holder 3d printflexvolt battery mountdewalt flexvolt rack 3d model
Questions people ask about a dewalt flexvolt battery wall rack
A rack that hangs four FLEXVOLT 60V/20V batteries (about 110 × 80 mm) on a stud so they are not mixed with 20V MAX packs. Each nest is 112 × 82 mm. The rail is 360 × 70 × 22 mm. Print in PETG with 2.4 mm walls.
Click Get it now on this page: the example prompt is filled in for you after you sign in. The model renders in your browser — nothing to install — and previewing is free. Adjust any millimetre in the chat, then export a watertight STL or 3MF for 2 credits when you want to print.
Start from this working example and replace any number with what you measured: Design a FLEXVOLT wall rack 360×70×22 mm, four 112×82 mm nests, 2.4 mm PETG.
The 20V MAX wall rack is too small. In SpeakCAD you generate and preview for free, then download a file sized for the part you actually own.
No. SpeakCAD runs entirely in the browser: the chat, the 3D engine and the live viewer load in the tab. The only file you download is the finished STL or 3MF.
More brackets & mounts
Pixel 10 Pro XL out-front bike mountAn out-front handlebar mount for a Pixel 10 Pro XL (about 163 × 77 × 8.6 mm) with a 22.2 / 31.8 mm clamp and a 70 mm deep cradle that clears the Camera Bar.HomePod mini 2 outlet shelfA shelf that hangs a HomePod mini 2 from a US or EU outlet so it does not sit on the kitchen wet zone, 100 mm well and a 20 mm cable drop.Makita 18V LXT impact wall holsterA holster that parks an 18V LXT impact (about 130 mm without battery) on a 4.5 mm hole pair.Corner bracket for 2020 aluminium extrusionAn L-shaped joining bracket for 20 x 20 mm aluminium extrusion.Brompton handlebar mount for Garmin Edge computersBrompton M and S bars have a 22.2 mm grip section and very little real estate once the brake levers and shifter are on, so a normal out-front mount does not…DeWalt 20V MAX battery wall rack with drop-in slotsA rail-style rack for DeWalt 20V MAX and XR batteries (also the 18V XR packs sold in Europe) that mirrors the slide-on rails of a DeWalt tool so a pack click…