1
The prompt on this page opens in SpeakCAD already filled in — after sign-in too. The model renders in your browser. Preview is free.Brackets & mounts
Bosch 18V GDR wall holster
This is not a fixed STL. SpeakCAD generates the bosch 18v gdr wall holster to your millimetres, you adjust it in the chat, then you download and print it.2
Change any millimetre in the chat: wall thickness, hole size, the thing it clips onto. Iterations stay in the tab until it matches what you own.Adjust
3Print
Download a watertight STL or 3MF for 2 credits, drop it in your slicer, and print it. Small fit fixes re-download free.Get it nowThe example prompt comes with you, even through sign-in. Preview is free; a download costs 2 credits.
What a bosch 18v gdr wall holster is
A holster that parks a Bosch 18V GDR impact (about 140 mm) on a 4.5 mm hole pair. The well is 72 × 46 × 55 mm with a 18 mm trigger cutout. Print in PETG with 2.4 mm walls.
The Kiox 300 hood is an e-bike part. In SpeakCAD you pick GDR vs GDS, preview the holster in the browser for free, then download the STL.
Example prompt
Create a Bosch 18V GDR holster 72×46×55 mm, 18 mm trigger cutout, two 4.5 mm holes, 2.4 mm PETG.
People also search
bosch gdr holster stlbosch 18v impact wall holder 3d printgdr 18v dockbosch impact holster 3d model
Questions people ask about a bosch 18v gdr wall holster
A holster that parks a Bosch 18V GDR impact (about 140 mm) on a 4.5 mm hole pair. The well is 72 × 46 × 55 mm with a 18 mm trigger cutout. Print in PETG with 2.4 mm walls.
Click Get it now on this page: the example prompt is filled in for you after you sign in. The model renders in your browser — nothing to install — and previewing is free. Adjust any millimetre in the chat, then export a watertight STL or 3MF for 2 credits when you want to print.
Start from this working example and replace any number with what you measured: Create a Bosch 18V GDR holster 72×46×55 mm, 18 mm trigger cutout, two 4.5 mm holes, 2.4 mm PETG.
The Kiox 300 hood is an e-bike part. In SpeakCAD you generate and preview for free, then download a file sized for the part you actually own.
No. SpeakCAD runs entirely in the browser: the chat, the 3D engine and the live viewer load in the tab. The only file you download is the finished STL or 3MF.
More brackets & mounts
Makita 18V LXT battery holder wall mount railA wall-mounted rail that holds Makita 18V LXT batteries (BL1830, BL1850, BL1860B) by their slide rails, exactly as a tool does, so the pack clicks in and the…Ibanez RG headstock guitar wall hanger angledA wall hanger shaped for the narrow, pointed reverse headstocks on Ibanez RG, S and JEM models, which slip out of the wide yokes made for a Fender Stratocast…UniFi G6 Instant corner mountA corner mount that aims a G6 Instant at 45 degrees across a porch, 80 × 40 × 40 mm with the official 4-hole pattern.Milwaukee M18 FUEL impact wall holsterA holster that parks an M18 FUEL impact (about 140 mm long without battery) on a 4.5 mm hole pair so the tool is not on the bench.Under-shelf bracket for a cable trayA J-shaped bracket that screws to the underside of a shelf or table and cradles a bundle of cables or a slim power strip out of sight.Wahoo ELEMNT Bolt out-front mount for 35 mm barsOversized 35 mm handlebars are common on modern gravel and mountain bikes, yet most Wahoo mounts ship for 31.8 mm only.