Brackets & mounts

Sim rig wind fan mount for a 120 mm fan

A one-piece bracket that stands a 120 mm PC fan on a 40 series aluminium profile, for a DIY wind simulator that blows harder as the car goes faster. The frame has the standard 105 mm hole square for M4 screws and a 116 mm opening, the foot takes two M8 bolts 40 mm apart, and the fan leans back 15 degrees to aim at your chest from the wheel deck. Frame and gussets are 4 mm thick, the foot 6 mm. It prints with the frame flat on the bed, without supports. Describe your measurements and SpeakCAD builds it with AI (credits), then download STL, 3MF or sliced G-code.
No ready-made model yet: building it uses credits (4 credits for the part on a plan, its first 3 small changes free; Maker: 50 credits a month for $7.99, cancel anytime).Updated

No ready-made model for this part yet

Sign in and SpeakCAD builds it from the prompt below (4 credits for the part on a plan, its first 3 small changes free; Maker: 50 credits a month for $7.99, cancel anytime). Want to try the editor first? The live demo is free, no account.
1

Describe

Sign in: the example prompt below is filled in. SpeakCAD builds the part from it with AI, 4 credits for the part on a plan, its first 3 small changes free (Maker: 50 credits a month for $7.99, cancel anytime). Replace any number with what you measured first.
2

Adjust

Change its numbers in the viewer for free, or ask the AI for a change in the chat (2 credits for a small change, 1 for a quick edit, 3 for a redesign; the first 3 small changes are free on a plan).
3

Print

Download a watertight STL or 3MF, included in every plan (4 credits without one), or G-code sliced for your printer at the same price.

Example prompt

Design a one-piece bracket that holds a 120 mm PC fan on a 40 series aluminium profile as a wind simulator. Fan frame: a plate 124 × 124 × 4 mm with a 116 mm round opening and four 4.5 mm holes on a 105 mm square for M4 screws. Foot: 124 × 40 × 6 mm with two 8.4 mm holes for M8 bolts, 40 mm apart and centred. The frame stands on the front edge of the foot and leans back 15 degrees over it, joined to the foot by two triangular side gussets 4 mm thick. Print with the fan frame flat on the bed, no supports.

Build it with AI opens the app with this prompt already typed. Replace any number with what you measured before sending it; the rest of the design stays consistent.

Fit notes

A fixed file gives you one fan size and one angle. A 140 mm fan has its holes on a 124.5 mm square, a fan mounted beside the monitor wants a steeper tilt, and a narrower foot suits 20 series profile with M5 bolts. In SpeakCAD those are numbers you change before printing, and the gussets follow.

Also searched as: sim racing wind simulator fan mount, 120mm fan bracket 4040 profile stl, sim rig fan mount 3d print, wind sim fan holder aluminium profile.

Questions people ask about a sim rig wind fan mount for a 120 mm fan

A one-piece bracket that stands a 120 mm PC fan on a 40 series aluminium profile, for a DIY wind simulator that blows harder as the car goes faster. The frame has the standard 105 mm hole square for M4 screws and a 116 mm opening, the foot takes two M8 bolts 40 mm apart, and the fan leans back 15 degrees to aim at your chest from the wheel deck. Frame and gussets are 4 mm thick, the foot 6 mm. It prints with the frame flat on the bed, without supports.

There is no ready-made model for this part yet. Click Build it with AI and sign in: the example prompt on this page is filled in, and SpeakCAD builds the part from it in your browser (4 credits for the part on a plan, its first 3 small changes free). Change any number in the viewer for free, then download a watertight STL or 3MF, included in every plan (4 credits without one), or G-code sliced for your printer at the same price. Start with Maker: 50 credits a month for $7.99, cancel anytime.

SpeakCAD builds it to your measurements from the example prompt on this page: the part uses 4 credits on a plan, its first 3 small changes free (3 without a plan), and a small change after them 2, then the STL or 3MF download is included in every plan (4 credits without one), or G-code sliced for your printer at the same price. Start with Maker: 50 credits a month for $7.99, cancel anytime. To try the editor before paying, the live demo is free, no account.

A shared STL is modelled for someone else's measurements. SpeakCAD builds this part to the millimetres you give it (AI requests use credits), so the file you download is sized for the part you actually own.

Yes. SpeakCAD slices the part on its servers with OrcaSlicer and your printer's official profile (380+ printers, including Bambu Lab, Prusa, Creality and Elegoo), and you download the G-code (a sliced .gcode.3mf for Bambu Lab printers). G-code sliced for your printer costs the same as the STL: included in every plan, free for a part you shaped by hand, 4 credits without a plan for a part with AI work in it. Pick your printer on the printers page to see its profile.

No. SpeakCAD runs in the browser on your phone or computer: the chat, the 3D engine and the live viewer load in the tab. The only file you download is the finished STL, 3MF or sliced G-code.

Build, adjust and print your sim rig wind fan mount for a 120 mm fan

Nothing to install. The prompt is waiting in the app after you sign in: SpeakCAD builds the part with AI (credits), no CAD skills needed, you check the fit, then download the STL, 3MF or sliced G-code.

Looking for a finished design by a maker? Browse the brackets & mounts on the marketplace, where makers share their models, most of them free.