1
Desk & office
Blue Yeti desk stand riser
This is not a fixed STL. SpeakCAD generates the blue yeti desk stand riser to your millimetres, you adjust it in the chat, then you download and print it.Building the 3D preview…
2
Adjust
Click a part and change its numbers in the viewer, or ask the AI in the chat: wall thickness, hole size, the thing it clips onto. AI changes use plan credits.3Print
Download a watertight STL or 3MF with a Maker or Pro plan, drop it in your slicer, and print it. Small fit fixes re-download free.
Get it nowOpening the ready-made model is free. A plan covers AI changes and the download.
Example prompt
Model a 60 mm tall riser for a Blue Yeti stand, 122×127×4 mm top pocket, hollow front, rear USB cable notch, 2.4 mm walls.
What a blue yeti desk stand riser is
A riser that lifts a Blue Yeti on its own stand (about 120 × 125 mm footprint) closer to your mouth. The top pocket is 122 × 127 mm and 4 mm deep so the stand cannot slide, the riser is 60 mm tall with a hollow front that fits a notepad, and a rear notch passes the USB cable. Walls are 2.4 mm. Print upside down in PLA.
The Yeti Nano stand has a smaller base, so it slides in the pocket; ask the chat for its size. Open the ready-made model in SpeakCAD for free, change the height in the viewer or the chat, then download the STL.
People also search
blue yeti riser stlblue yeti stand riser 3d printyeti mic liftmicrophone riser 3d print
Questions people ask about a blue yeti desk stand riser
A riser that lifts a Blue Yeti on its own stand (about 120 × 125 mm footprint) closer to your mouth. The top pocket is 122 × 127 mm and 4 mm deep so the stand cannot slide, the riser is 60 mm tall with a hollow front that fits a notepad, and a rear notch passes the USB cable. Walls are 2.4 mm. Print upside down in PLA.
Click Get it now on this page and sign in: you can open the ready-made model for free, and the example prompt is filled in if you want the AI to redesign it. The model renders in your browser, nothing to install. Change any millimetre in the viewer or the chat (AI changes use plan credits), then export a watertight STL or 3MF with a Maker or Pro plan when you want to print.
Start from this working example and replace any number with what you measured: Model a 60 mm tall riser for a Blue Yeti stand, 122×127×4 mm top pocket, hollow front, rear USB cable notch, 2.4 mm walls.
The Yeti Nano stand has a smaller base, so it slides in the pocket; ask the chat for its size. In SpeakCAD you open the ready-made model for free, change it to your measurements, then download a file sized for the part you actually own.
No. SpeakCAD runs entirely in the browser: the chat, the 3D engine and the live viewer load in the tab. The only file you download is the finished STL or 3MF.
More desk & office
Studio Display tilt-stop wedgeA 12 mm wedge that sits under a Studio Display stand so the screen cannot droop below 10 degrees on a polished desk.Magic Keyboard with Numeric Keypad angled trayA 6 degree tray for the Magic Keyboard with Numeric Keypad (about 418 × 115 × 11 mm) so the larger board matches a Magic Trackpad wedge.Samsung Galaxy S25 Ultra desk standA stand that holds a Galaxy S25 Ultra (about 163 × 79 × 8.2 mm) at 55 degrees with a 14 mm USB-C slot and a 7.2 mm S Pen well.Vertical laptop stand for closed-lid dockingA weighted-look holder that stores a closed laptop on its edge beside a monitor.Elgato Wave 3 microphone desk riser with cable slotA riser that lifts the Elgato Wave:3 closer to mouth height without a boom arm.IKEA LACK 60 mm square cable grommetA square grommet that drops into a 60 mm LACK hole and presents a 20 mm brush opening plus a 8 mm USB-C notch.