Quad Lock desk dock stand with USB-C cable slot
A desk stand with a Quad Lock style twist-lock recess on a 60 degree face, so a phone in a Quad Lock case clicks on in portrait or landscape and charges through a USB-C cable routed up from the base. The recess copies the four-lug pattern, about 37 mm across and 4 mm deep, with a printed friction bump instead of the spring lever, and the 100 x 80 mm base has a 6 mm channel so the cable plug sits ready under the phone. Walls are 3 mm and it prints upright.
Quad Lock only sells a few desk options and none of them fit every desk or cable. In SpeakCAD you describe the lug measurements from your case, the angle you want and your cable, preview the stand free in the browser, refine the twist stop in the chat, then download the STL.
Design a desk phone stand with a 60 degree face holding a Quad Lock style recess 37 mm across and 4 mm deep with four 8 mm lug notches and a 0.6 mm friction bump, a 100 x 80 x 15 mm base with a 6 mm USB-C cable channel and 3 mm walls.