1
The prompt on this page opens in SpeakCAD already filled in — after sign-in too. The model renders in your browser. Preview is free.Tools & jigs
Bambu Lab X1C AMS PTFE guide clip
This is not a fixed STL. SpeakCAD generates the bambu lab x1c ams ptfe guide clip to your millimetres, you adjust it in the chat, then you download and print it.2
Change any millimetre in the chat: wall thickness, hole size, the thing it clips onto. Iterations stay in the tab until it matches what you own.Adjust
3Print
Download a watertight STL or 3MF for 2 credits, drop it in your slicer, and print it. Small fit fixes re-download free.Get it nowThe example prompt comes with you, even through sign-in. Preview is free; a download costs 2 credits.
What a bambu lab x1c ams ptfe guide clip is
A clip that holds four 4 mm PTFE tubes in a tidy arc above an X1C AMS so they do not kink at the hub. The body is 60 × 18 × 12 mm with four 4.3 mm bores on 12 mm centres. Print two in PETG.
The A1 AMS Lite clip is a different rail. Describe AMS vs AMS 2 Pro in SpeakCAD, preview the clip in the browser without paying, then download the STL.
Example prompt
Model an X1C AMS PTFE guide clip 60×18×12 mm, four 4.3 mm bores on 12 mm centres, PETG, pair.
People also search
bambu x1c ams clip stlx1c ptfe guide 3d printbambu x1c filament guidex1c ams tube clip 3d model
Questions people ask about a bambu lab x1c ams ptfe guide clip
A clip that holds four 4 mm PTFE tubes in a tidy arc above an X1C AMS so they do not kink at the hub. The body is 60 × 18 × 12 mm with four 4.3 mm bores on 12 mm centres. Print two in PETG.
Click Get it now on this page: the example prompt is filled in for you after you sign in. The model renders in your browser — nothing to install — and previewing is free. Adjust any millimetre in the chat, then export a watertight STL or 3MF for 2 credits when you want to print.
Start from this working example and replace any number with what you measured: Model an X1C AMS PTFE guide clip 60×18×12 mm, four 4.3 mm bores on 12 mm centres, PETG, pair.
The A1 AMS Lite clip is a different rail. In SpeakCAD you generate and preview for free, then download a file sized for the part you actually own.
No. SpeakCAD runs entirely in the browser: the chat, the 3D engine and the live viewer load in the tab. The only file you download is the finished STL or 3MF.
More tools & jigs
Router edge-guide clamp-on fenceA clamp-on fence that turns any palm router into an edge guide with a 120 mm face and a 20–40 mm clamp for the base.Sanding block for 93 mm 1/3 sheetsA 93 × 185 × 40 mm block that wraps a 1/3 sheet with 2 mm side clips.DeWalt TOUGHSYSTEM 2.0 bit railsRails that drop into a TOUGHSYSTEM 2.0 DS150 and hold 40 bits on 7 mm slots so they replace the foam.Drill depth-stop collar setA drill depth-stop collar slides onto a twist bit and stops the chuck from driving deeper than you want, so dowel holes, hinge cups and pilot holes all end a…Glue bottle stand with roller applicator holderWood glue bottles stored upright form a crust in the nozzle, while a bottle stored tip-down dispenses instantly.Prusa MK4 filament runout guide with PTFE fittingA guide arm that bolts to the top of the Prusa MK4 or MK3.9 frame and routes filament from the spool holder into the Nextruder through a short length of PTFE…