Custom parts for the Bambu Lab X1 Carbon: describe them, download a .gcode.3mf sliced for it
From a sentence to the X1 Carbon's microSD card
The slicer runs on our side with the same profiles OrcaSlicer ships for the Bambu Lab X1 Carbon. You choose the print profile and the filament; the printer settings are already right.Check it on the X1 Carbon's bed
The part renders on a virtual bed the size of the X1 Carbon's. The first render usually appears within a minute or two: a new part gets deeper reasoning through the geometry, and small edits land in seconds. Turn it, tap a face to read a size, open the dimensions panel, and see whether it has overhangs that need supports. Anything wrong is one sentence to fix.Pick the Bambu Lab X1 Carbon and its profile
In the download dialog choose the Bambu Lab X1 Carbon (0.2 nozzle, 0.4 nozzle, 0.6 nozzle, 0.8 nozzle), one of its print profiles (0.06 mm, 0.08 mm, 0.1 mm, 0.12 mm…), a filament, then infill, walls, supports and adhesion. The printer and its last settings are saved to your account.Download and print
You get a sliced .gcode.3mf, the file Bambu printers read from the microSD card and that Bambu Studio sends over the network, with the estimated print time and filament weight. Re-slicing a design you already downloaded, with other settings, charges nothing: the G-code costs what the STL costs (included in every plan, 4 credits once without one for a part with AI work in it).The Bambu Lab X1 Carbon profile SpeakCAD slices with
| Setting | Value |
|---|---|
| Printer | Bambu Lab X1 Carbon (Bambu Lab) |
| Printable area in the profile | 256 x 256 x 250 mm |
| Nozzle variants | 0.2 nozzle, 0.4 nozzle, 0.6 nozzle, 0.8 nozzle |
| Layer heights in the print profiles | 0.06 mm, 0.08 mm, 0.1 mm, 0.12 mm, 0.14 mm, 0.16 mm, 0.18 mm, 0.2 mm, 0.24 mm, 0.28 mm, 0.3 mm, 0.32 mm and more |
| Filament profiles | PLA, PETG, ABS, ASA, TPU, PLA-CF, PETG-CF, PC, PA, PA-CF, plus the OrcaSlicer filament library |
| Download | Sliced .gcode.3mf (Bambu), or STL and 3MF for your own slicer |
| Slicer | OrcaSlicer, run on our servers with the printer's official profile |
| Your own STL or 3MF | The online slicer: .gcode.3mf with this profile, free with a free account (up to 10 files a day) |
Prompts sized for the X1 Carbon
Copy one, change the numbers to yours. Each opens in the editor with the text already typed.“A purge wiper replacement for a Bambu Lab X1 Carbon: 60 x 12 x 8 mm blade holder with a 2 mm slot, two M3 holes on a 40 mm pitch, printed in PA-CF.”
Open this prompt in the editor“Lid riser corner spacers for an X1 Carbon: four 35 mm cubes with a 6 mm lip on two faces that locate on the glass lid, 3 mm walls.”
Open this prompt in the editor“A camera mount for a Raspberry Pi Camera Module 3 on a 2020 extrusion: T-nut slot, 15 degree tilt, 3 mm walls, PETG-CF.”
Open this prompt in the editorWhy X1 Carbon owners do not need a slicer on the phone
Slicing is the step that keeps 3D printing on the desktop: a design made anywhere still has to pass through Bambu Studio, PrusaSlicer or Cura on a computer. SpeakCAD runs OrcaSlicer on its own servers with the profile OrcaSlicer ships for the Bambu Lab X1 Carbon, so the phone that typed the description also downloads a .gcode.3mf. The desktop slicer stays the better choice for arranging many parts on one bed or for exotic settings; for one part at a time, the download dialog covers the profile, the filament, infill, walls, supports and adhesion.
Slice your own STL for the X1 Carbon
Already have the file, a Printables or MakerWorld download or a part from your own CAD? The online slicer slices an STL or 3MF of up to 50 MB with the same Bambu Lab X1 Carbon profile, without the AI: layer heights from 0.06 to 0.56 mm across its nozzles, filament presets for PLA, PETG, ABS, ASA, TPU, PLA-CF, PETG-CF, PC, PA, PA-CF, infill, supports, walls and bed adhesion. You download a sliced .gcode.3mf for the microSD card or Bambu Studio, with the print time and filament weight. The online slicer is free with a free account (no card, no credits): up to 10 files a day, and re-slicing the same file with other settings within 24 hours does not count. Accounts on a paid plan slice up to 60 files a day. Open the online slicer.
Parts that fit the X1 Carbon
The Bambu Lab X1 Carbon's 256 x 256 mm bed and 250 mm height are what the virtual bed in the viewer shows, so a part that looks too big is too big. Ask for a part to be split into two halves with alignment pins when it does not fit, or for a flat print orientation when it would need supports. The examples above and the library parts below all fit.
Parts that fit the first time
The Bambu Lab X1 Carbon prints slightly differently from the next printer, which is why holes come out tight and lids loose. Fit Check cuts a five-minute test slice from the interface that must fit, you report too tight, perfect or too loose, and every model after that is built with the clearance your X1 Carbon needs. The test slice downloads free as STL or 3MF. How Fit Check works.
The X1 Carbon against its rivals
Ready-made parts for the X1 Carbon in the library
Questions
Yes. The Bambu Lab X1 Carbon is one of the 380+ printers in the slicer catalog, with 4 nozzle variants and the print and filament profiles OrcaSlicer ships for it. Pick it in the download dialog and download a .gcode.3mf; it is saved to your account for next time.
No. SpeakCAD slices on its servers and gives you a .gcode.3mf. Copy it to the X1 Carbon's microSD card and start it from the printer's screen, or open it in Bambu Studio and send it over the network. If you prefer your own slicer, download the STL or 3MF instead.
The print profile (layer height and speed presets from the Bambu Lab X1 Carbon's profile), the filament profile (the printer's own and the OrcaSlicer library: Generic PLA, PETG, ABS, ASA, TPU, carbon-fibre blends and hundreds of branded filaments), infill, wall count, supports and bed adhesion. Nozzle temperature, bed temperature and speeds come from the profiles you pick.
The virtual bed in the viewer is sized from the Bambu Lab X1 Carbon's profile (256 x 256 mm), so you see it before slicing. Ask for the part to be split into two pieces with alignment pins or a dovetail, or for a different orientation; each is one sentence.
G-code sliced for your printer costs the same as the STL: included in every plan, free for a part you shaped by hand, 4 credits without a plan for a part with AI work in it. Re-slicing a design you already downloaded, with other settings, charges nothing. STL and 3MF downloads are always available.
Yes. Upload the STL or 3MF (up to 50 MB) to SpeakCAD's online slicer, pick the Bambu Lab X1 Carbon, choose the layer height, filament, infill and supports, and download a sliced .gcode.3mf. It slices with the same OrcaSlicer profile as the editor's G-code download, in the browser on a computer, a Chromebook, an iPad or a phone. The online slicer is free with a free account (no card, no credits): up to 10 files a day, and re-slicing the same file with other settings within 24 hours does not count. Accounts on a paid plan slice up to 60 files a day.
Yes. The editor runs in Safari on iPhone and iPad and in Chrome on Android; the file lands in Files or Downloads, ready for the card or the printer's app. The same project opens later on a desktop.