1
Replacement parts
Bambu Lab X1 Carbon lid riser corner spacers
This is not a fixed STL. SpeakCAD generates the bambu lab x1 carbon lid riser corner spacers to your millimetres, you adjust it in the chat, then you download and print it.Building the 3D preview…
2
Adjust
Click a part and change its numbers in the viewer, or ask the AI in the chat: wall thickness, hole size, the thing it clips onto. AI changes use plan credits.3Print
Download a watertight STL or 3MF with a Maker or Pro plan, drop it in your slicer, and print it. Small fit fixes re-download free.
Get it nowOpening the ready-made model is free. A plan covers AI changes and the download.
Example prompt
Model four L-shaped lid riser corners for a Bambu X1 Carbon, 40×40 mm, 20 mm lift, 5 mm locating lips top and bottom, 3 mm walls.
What a bambu lab x1 carbon lid riser corner spacers is
Four corner spacers that raise the glass top of an X1 Carbon (389 × 389 × 457 mm) by 20 mm, letting warm air out when printing PLA or PETG so the chamber does not heat-creep the extruder. Each spacer is a 40 × 40 mm L-shaped corner with a 5 mm tall locating lip on top and a matching lip underneath that hooks the frame corner, with 3 mm walls. Print in PETG or ASA, lip side up.
They also fit a P1S, which shares the X1C body, but not the taller-bodied H2D. Open the model in SpeakCAD at no cost, set a 10 or 30 mm lift in the viewer or the chat, then download the STL.
People also search
x1 carbon lid riser stlx1c top glass riserbambu x1c lid spacer plax1c lid riser 3d print
Questions people ask about a bambu lab x1 carbon lid riser corner spacers
Four corner spacers that raise the glass top of an X1 Carbon (389 × 389 × 457 mm) by 20 mm, letting warm air out when printing PLA or PETG so the chamber does not heat-creep the extruder. Each spacer is a 40 × 40 mm L-shaped corner with a 5 mm tall locating lip on top and a matching lip underneath that hooks the frame corner, with 3 mm walls. Print in PETG or ASA, lip side up.
Click Get it now on this page and sign in: you can open the ready-made model for free, and the example prompt is filled in if you want the AI to redesign it. The model renders in your browser, nothing to install. Change any millimetre in the viewer or the chat (AI changes use plan credits), then export a watertight STL or 3MF with a Maker or Pro plan when you want to print.
Start from this working example and replace any number with what you measured: Model four L-shaped lid riser corners for a Bambu X1 Carbon, 40×40 mm, 20 mm lift, 5 mm locating lips top and bottom, 3 mm walls.
They also fit a P1S, which shares the X1C body, but not the taller-bodied H2D. In SpeakCAD you open the ready-made model for free, change it to your measurements, then download a file sized for the part you actually own.
No. SpeakCAD runs entirely in the browser: the chat, the 3D engine and the live viewer load in the tab. The only file you download is the finished STL or 3MF.
More replacement parts
IKEA BESTÅ 30 mm leg riserA 30 mm riser that screws onto a BESTÅ leg (M8) so a robot mop can pass under the TV unit.Bambu Lab H2D riser feetHeavy-duty riser feet for an H2D (492 × 514 × 626 mm) that lift it 30 mm so the base breathes and a cable can pass underneath.Whirlpool dishwasher tine row pivot clipA pivot clip for the folding tine rows in Whirlpool and KitchenAid lower racks, which lets the row fold flat and stay on the rack.Bialetti Moka Express 3-cup handleA replacement handle for the 3-cup Bialetti Moka Express, about 70 mm long, that fixes to the boss on the upper chamber with the original screw.Cordless drill battery latch buttonThe spring-loaded latch button that locks a battery pack into a cordless drill wears out or snaps its tab, so the pack slides off mid-job.Stryd foot-pod shoe-clip spareA spare clip that holds a Stryd running pod (about 28 × 25 × 10 mm) on a lacing pattern 8–14 mm wide.