1
Replacement parts
Bambu Lab P1S riser feet
This is not a fixed STL. SpeakCAD generates the bambu lab p1s riser feet to your millimetres, you adjust it in the chat, then you download and print it.Building the 3D preview…
2
Adjust
Click a part and change its numbers in the viewer, or ask the AI in the chat: wall thickness, hole size, the thing it clips onto. AI changes use plan credits.3Print
Download a watertight STL or 3MF with a Maker or Pro plan, drop it in your slicer, and print it. Small fit fixes re-download free.
Get it nowOpening the ready-made model is free. A plan covers AI changes and the download.
Example prompt
Model riser feet for a Bambu P1S, 50×50 mm, 30 mm lift, 25 mm pocket 6 mm deep, internal ribs, 3 mm walls.
What a bambu lab p1s riser feet is
Four riser feet that lift a P1S (389 × 389 × 458 mm) by 30 mm, so the bottom stays cool, the power cable can pass underneath and the door clears a desk lip. Each foot is a 50 mm square with a 25 mm pocket 6 mm deep for the stock rubber foot, internal ribs and 3 mm walls, and it carries the 12 to 15 kg printer plus an AMS. Print in PETG with 4 walls, pocket up.
The X1 Carbon shares this base, but the H2D is much bigger and heavier. Open the ready-made feet in SpeakCAD for free, change the lift in the viewer or the chat, then download the STL.
People also search
p1s riser feet stlbambu p1s feetp1s anti vibration feetx1c riser feet 3d print
Questions people ask about a bambu lab p1s riser feet
Four riser feet that lift a P1S (389 × 389 × 458 mm) by 30 mm, so the bottom stays cool, the power cable can pass underneath and the door clears a desk lip. Each foot is a 50 mm square with a 25 mm pocket 6 mm deep for the stock rubber foot, internal ribs and 3 mm walls, and it carries the 12 to 15 kg printer plus an AMS. Print in PETG with 4 walls, pocket up.
Click Get it now on this page and sign in: you can open the ready-made model for free, and the example prompt is filled in if you want the AI to redesign it. The model renders in your browser, nothing to install. Change any millimetre in the viewer or the chat (AI changes use plan credits), then export a watertight STL or 3MF with a Maker or Pro plan when you want to print.
Start from this working example and replace any number with what you measured: Model riser feet for a Bambu P1S, 50×50 mm, 30 mm lift, 25 mm pocket 6 mm deep, internal ribs, 3 mm walls.
The X1 Carbon shares this base, but the H2D is much bigger and heavier. In SpeakCAD you open the ready-made model for free, change it to your measurements, then download a file sized for the part you actually own.
No. SpeakCAD runs entirely in the browser: the chat, the 3D engine and the live viewer load in the tab. The only file you download is the finished STL or 3MF.
More replacement parts
Kenwood Chef slow outlet coverA replacement cover for the front slow-speed outlet of Kenwood Chef mixers, the twist-on cap that keeps flour out of the drive.Extension cord reel crank handleCable reels are wound by a folding crank handle whose plastic knob and pivot break long before the cable does.Digital-caliper SR44 battery-door replacementA snap-in battery door for a 150 mm digital caliper that takes an SR44 / 357 cell, 16 mm across with a 0.6 mm lip.IKEA BROR caster brake wedgeA wedge that chocks a BROR 100 mm caster so the trolley does not roll when you open a drawer.Prusa CORE One riser feetRiser feet for a Prusa CORE One (about 415 × 435 mm footprint) that lift it 30 mm so the bottom intake gets more air and a drawer tray can slide under the fr…Dishwasher rack tine tip caps for 3 mm wirePush-on caps that cover the rusting ends of dishwasher rack tines on Bosch, Siemens, Whirlpool and most other racks, whose tines are 2.5 to 3.5 mm steel wire.