Replacement parts

IKEA Hemnes drawer knob replacement with M4 screw

A replacement knob for IKEA Hemnes and Malm drawers that reproduces the round 25 mm shape when one cracks or goes missing from a second-hand dresser. The knob is 25 mm in diameter and 22 mm tall with a 12 mm neck, and a captive M4 nut pocket 7 mm across and 3.2 mm deep so a standard M4 machine screw from the inside of the drawer front pulls it tight. The top is domed with a 2 mm fillet and a matte finish prints best face down on a textured bed. Use 4 walls and 40 percent infill so the neck does not shear under daily use.

Knob diameters, neck heights and screw threads vary between IKEA lines and years, so a knob generated to match the surviving ones looks right rather than obviously replaced. In SpeakCAD you give the diameter and screw size, preview the knob in the browser at no cost, adjust the dome in the chat and download the STL.

Get it nowGenerate and preview for free, in your browser. A download costs 2 credits.

Design a round drawer knob 25 mm in diameter and 22 mm tall with a 12 mm diameter neck 8 mm long, a domed top with a 2 mm fillet and a hexagonal pocket 7 mm across and 3.2 mm deep for a captive M4 nut, matching an IKEA Hemnes dresser knob, with a 4.5 mm through hole.

Change any number to match what you measured. The AI keeps the rest of the design consistent, and small follow-up edits after a download are free.

More replacement parts

Window handle with 7 mm square spindleTilt-and-turn and casement windows use an espagnolette handle on a 7 mm square spindle; when the original breaks the window is stuck.Curtain track glider setCurtain track gliders crack and stop sliding, leaving curtains bunched at one end, and matching the profile of an older track is rarely possible from a shop.Kuat NV bike rack wheel tray end capThe plastic caps on the ends of Kuat NV and Sherpa wheel trays crack in the cold and let water into the extrusion.Creality Ender 3 V3 bed leveling knob replacementA replacement thumbwheel for the bed leveling screws on a Creality Ender 3 V3 SE and KE, Ender 3 V2 and Neo, which use M4 screws with a knurled 34 mm plastic…IKEA Billy shelf pin replacement for 5 mm holesA replacement shelf support for the IKEA Billy bookcase, Hemnes and Ivar, which use 5 mm holes and lose pins every time you move house.Window blind tilt wand clipThe small plastic hook that connects a venetian blind tilt wand to the headrail is often the first thing to break, leaving the slats stuck.

Make your ikea hemnes drawer knob replacement with m4 screw now

Nothing to install and no CAD skills needed. Describe it, watch it render, download the STL or 3MF and print it tonight.

Get it nowBrowse the library
Looking for a ready-made version? Check the marketplace, where makers sell finished, rated models for credits.