Replacement parts

Bambu Lab P1S AMS top riser frame

A riser frame that lifts an AMS (372 × 280 × 227 mm) about 30 mm above the glass lid of a P1S (389 × 389 × 458 mm), so the four PTFE tubes can bend gently into the top feed and the lid can still be propped for PLA. The frame has a 374 × 282 mm pocket with 3 mm lips that keep the AMS from walking, four 12 mm wide feet that sit on the lid rim rather than the glass centre, and a 30 × 10 mm rear notch for the tubes. Print in PETG in four corner pieces joined with dovetails. Describe your measurements and SpeakCAD builds it with AI (credits), then download STL, 3MF or sliced G-code.
No ready-made model yet: building it uses credits (4 credits for the part on a plan, its first 3 small changes free; Maker: 50 credits a month for $7.99, cancel anytime).Updated

No ready-made model for this part yet

Sign in and SpeakCAD builds it from the prompt below (4 credits for the part on a plan, its first 3 small changes free; Maker: 50 credits a month for $7.99, cancel anytime). Want to try the editor first? The live demo is free, no account.
1

Describe

Sign in: the example prompt below is filled in. SpeakCAD builds the part from it with AI, 4 credits for the part on a plan, its first 3 small changes free (Maker: 50 credits a month for $7.99, cancel anytime). Replace any number with what you measured first.
2

Adjust

Change its numbers in the viewer for free, or ask the AI for a change in the chat (2 credits for a small change, 1 for a quick edit, 3 for a redesign; the first 3 small changes are free on a plan).
3

Print

Download a watertight STL or 3MF, included in every plan (4 credits without one), or G-code sliced for your printer at the same price.

Example prompt

Design a riser frame for a Bambu AMS on a P1S lid, 374×282 mm pocket, 3 mm lips, 30 mm tall, four 12 mm feet, 30×10 mm rear PTFE notch, split in four dovetailed corners.

Build it with AI opens the app with this prompt already typed. Replace any number with what you measured before sending it; the rest of the design stays consistent.

Fit notes

The AMS lite is an open spool rack, not a box, and will not sit in this pocket.

Also searched as: p1s ams riser stl, bambu p1s ams top stand, ams riser for p1s lid, p1s ams on top riser 3d print.

Questions people ask about a Bambu Lab P1S AMS top riser frame

A riser frame that lifts an AMS (372 × 280 × 227 mm) about 30 mm above the glass lid of a P1S (389 × 389 × 458 mm), so the four PTFE tubes can bend gently into the top feed and the lid can still be propped for PLA. The frame has a 374 × 282 mm pocket with 3 mm lips that keep the AMS from walking, four 12 mm wide feet that sit on the lid rim rather than the glass centre, and a 30 × 10 mm rear notch for the tubes. Print in PETG in four corner pieces joined with dovetails.

There is no ready-made model for this part yet. Click Build it with AI and sign in: the example prompt on this page is filled in, and SpeakCAD builds the part from it in your browser (4 credits for the part on a plan, its first 3 small changes free). Change any number in the viewer for free, then download a watertight STL or 3MF, included in every plan (4 credits without one), or G-code sliced for your printer at the same price. Start with Maker: 50 credits a month for $7.99, cancel anytime.

SpeakCAD builds it to your measurements from the example prompt on this page: the part uses 4 credits on a plan, its first 3 small changes free (3 without a plan), and a small change after them 2, then the STL or 3MF download is included in every plan (4 credits without one), or G-code sliced for your printer at the same price. Start with Maker: 50 credits a month for $7.99, cancel anytime. To try the editor before paying, the live demo is free, no account.

A shared STL is modelled for someone else's measurements. SpeakCAD builds this part to the millimetres you give it (AI requests use credits), so the file you download is sized for the part you actually own.

Yes. SpeakCAD slices the part on its servers with OrcaSlicer and your printer's official profile (380+ printers, including Bambu Lab, Prusa, Creality and Elegoo), and you download the G-code (a sliced .gcode.3mf for Bambu Lab printers). G-code sliced for your printer costs the same as the STL: included in every plan, free for a part you shaped by hand, 4 credits without a plan for a part with AI work in it. Pick your printer on the printers page to see its profile.

No. SpeakCAD runs in the browser on your phone or computer: the chat, the 3D engine and the live viewer load in the tab. The only file you download is the finished STL, 3MF or sliced G-code.

Build, adjust and print your Bambu Lab P1S AMS top riser frame

Nothing to install. The prompt is waiting in the app after you sign in: SpeakCAD builds the part with AI (credits), no CAD skills needed, you check the fit, then download the STL, 3MF or sliced G-code.

Looking for a finished design by a maker? Browse the replacement parts on the marketplace, where makers share their models, most of them free.