1
The prompt on this page opens in SpeakCAD already filled in — after sign-in too. The model renders in your browser. Preview is free.Tools & jigs
Bambu Lab P1S AMS desiccant box
This is not a fixed STL. SpeakCAD generates the bambu lab p1s ams desiccant box to your millimetres, you adjust it in the chat, then you download and print it.2
Change any millimetre in the chat: wall thickness, hole size, the thing it clips onto. Iterations stay in the tab until it matches what you own.Adjust
3Print
Download a watertight STL or 3MF for 2 credits, drop it in your slicer, and print it. Small fit fixes re-download free.Get it nowThe example prompt comes with you, even through sign-in. Preview is free; a download costs 2 credits.
What a bambu lab p1s ams desiccant box is
A box that sits in a P1S AMS slot and holds 50 g of desiccant with a 0.4 mm vent grid so the official bag is not the only dryer. The box is 70 × 50 × 20 mm. Print in PETG with 1.2 mm walls.
The AMS desiccant tray is a different AMS generation. In SpeakCAD you set bead vs bag, preview the box in the browser for free, then download the STL.
Example prompt
Create a P1S AMS desiccant box 70×50×20 mm with a 0.4 mm vent grid, 1.2 mm PETG.
People also search
p1s ams desiccant stlbambu p1s dryer box 3d printp1s ams silica holderbambu p1s desiccant 3d model
Questions people ask about a bambu lab p1s ams desiccant box
A box that sits in a P1S AMS slot and holds 50 g of desiccant with a 0.4 mm vent grid so the official bag is not the only dryer. The box is 70 × 50 × 20 mm. Print in PETG with 1.2 mm walls.
Click Get it now on this page: the example prompt is filled in for you after you sign in. The model renders in your browser — nothing to install — and previewing is free. Adjust any millimetre in the chat, then export a watertight STL or 3MF for 2 credits when you want to print.
Start from this working example and replace any number with what you measured: Create a P1S AMS desiccant box 70×50×20 mm with a 0.4 mm vent grid, 1.2 mm PETG.
The AMS desiccant tray is a different AMS generation. In SpeakCAD you generate and preview for free, then download a file sized for the part you actually own.
No. SpeakCAD runs entirely in the browser: the chat, the 3D engine and the live viewer load in the tab. The only file you download is the finished STL or 3MF.
More tools & jigs
Sanding block for 93 mm 1/3 sheetsA 93 × 185 × 40 mm block that wraps a 1/3 sheet with 2 mm side clips.DeWalt TOUGHSYSTEM 2.0 bit railsRails that drop into a TOUGHSYSTEM 2.0 DS150 and hold 40 bits on 7 mm slots so they replace the foam.Drill depth-stop collar setA drill depth-stop collar slides onto a twist bit and stops the chuck from driving deeper than you want, so dowel holes, hinge cups and pilot holes all end a…Glue bottle stand with roller applicator holderWood glue bottles stored upright form a crust in the nozzle, while a bottle stored tip-down dispenses instantly.Prusa MK4 filament runout guide with PTFE fittingA guide arm that bolts to the top of the Prusa MK4 or MK3.9 frame and routes filament from the spool holder into the Nextruder through a short length of PTFE…Dowel centre-finder set 6, 8 and 10 mmThree centre-finders that mark matching dowel holes: 6, 8 and 10 mm bodies with a 1.5 mm centre pin.